-
E-mail
sales2@handelsen.cn
-
Phone
15801397840
-
Address
B-1707, 17th Floor, No. 222 Wangjing Xiyuan, Chaoyang District, Beijing
Beijing Handasen Machinery Technology Co., Ltd
sales2@handelsen.cn
15801397840
B-1707, 17th Floor, No. 222 Wangjing Xiyuan, Chaoyang District, Beijing
In scenarios such as chemical raw material transportation and water treatment systems, fluid media often contain corrosive components, which impose strict requirements on the "corrosion resistance+long life" of solenoid valves. Equipment procurement managers and maintenance engineers need a valve that can operate stably in complex corrosive environments. The Q2C160.BB0.671 solenoid valve from Flo Control in Italy has become the preferred component in the chemical water treatment industry due to its enhanced corrosion resistance design, long-life structure, and precise flow control performance, solving the industry pain points of "corrosion damage, short service life, and seal failure".
The technical parameters of Flo Control Q2C160.BB0.671 solenoid valve are optimized for corrosive environments, and both the material and structure have been strengthened for corrosion resistance:
| Technical parameters< | Specification details< | Corrosion resistance and lifespan value |
|---|---|---|
| Valve body material | 316L stainless steel (optional Hastelloy) | Resistant to corrosive media such as strong acids, strong alkalis, and salt solutions, with no risk of rusting |
| sealing material | FFKM perfluoroelastomer | Strong corrosion resistance, suitable for most corrosive media, long sealing life |
| Hole size | 1.5mm | Suitable for transporting medium and low flow corrosive media |
| Flow coefficient Kv* | 0.55L/min (1bar pressure difference) | Flow error ≤ ± 2%, flow control accuracy meets industrial requirements |
| work pressure | 10Bar | Adapt to the conventional pressure requirements of chemical water treatment systems |
| power supply voltage | 12VDC/24VDC (optional) | Adapt power supply systems for different devices |
| Coil protection | IP65 protection level | Dustproof and waterproof, suitable for harsh industrial environments |
| Valve core processing | PTFE coating treatment | Enhance corrosion resistance, reduce wear, and extend lifespan |
| Installation interface | G1 | Suitable for medium diameter corrosive medium pipelines, easy to install |
| service life | ≥ 15 million opening and closing cycles | Long life design, reducing replacement frequency |
In the chemical and water treatment industries, traditional solenoid valves face two core pain points: firstly, the valve body and sealing materials have insufficient corrosion resistance, which is prone to rusting and aging in strong acids, alkalis, salt solutions and other media, leading to valve damage and fluid leakage, not only wasting raw materials, but also potentially causing safety accidents; Secondly, the service life is short. Ordinary valves can only operate for 3-6 months in corrosive environments, and frequent replacement increases procurement and maintenance costs, while also causing production line downtime.
Flo Control Q2C160.BB0.671 solenoid valve addresses these issues by using 316L stainless steel (optional Hastelloy) for the valve body and FFKM perfluoroelastomer for the sealing material. Both have strong corrosion resistance and can adapt to most acid-base and salt media, avoiding corrosion and seal aging; The valve core is treated with PTFE coating, further enhancing its corrosion resistance and wear resistance. The service life of the valve is extended to 15 million opening and closing cycles, far exceeding the traditional valve's 3 million cycles, significantly reducing the frequency of replacement; The coil design with IP65 protection level is dustproof and waterproof, suitable for harsh industrial environments in the chemical water treatment industry, and reduces the risk of coil damage.
Taking the acidic raw material transportation pipeline in the chemical industry as an example, traditional solenoid valves will experience valve body rust and seal leakage after 3 months, while Flo Control Q2C160.BB0.671 solenoid valves can operate stably for more than 2 years, reducing maintenance costs by 70%; In the control of saline wastewater in water treatment systems, the corrosion resistance of this valve prevents wastewater leakage, while the long lifespan design reduces downtime for replacement and improves production efficiency.
The corrosion resistance and long service life characteristics of Flo Control Q2C160.BB0.671 solenoid valve make it play a core role in corrosive environments in industries such as chemical and water treatment
chemical industryAcid/alkaline raw material transportation, chemical reagent control, corrosive solvent transportation pipeline, corrosion resistance suitable for complex media;
water treatment industrySalt containing wastewater treatment, acid-base neutralization tank fluid control, water purification equipment disinfection medium transportation, stable operation without leakage;
Electroplating industryElectroplating solution transportation, acid and alkali cleaning solution control, corrosion resistance meets the requirements of electroplating process;
pharmaceutical industryCorrosive drug delivery, control of cleaning and disinfecting fluids, in compliance with the hygiene and corrosion resistance requirements of the pharmaceutical industry.
For equipment procurement managers, the corrosion resistance and long lifespan advantages of Flo Control Q2C160.BB0.671 solenoid valve can reduce procurement and maintenance costs; Maintenance engineers do not need to frequently deal with valve corrosion and damage issues, improving maintenance efficiency. As an imported solenoid valve specifically designed for corrosive environments, its stability and adaptability to different scenarios are the core components that ensure production safety and efficiency in the chemical water treatment industry.