Appearance and stitching requirements for marine life jackets

About Us

Dongtai Ganghui Ship Equipment Co., Ltd

E-mail
1578334509@qq.com
Phone
13770271530
Address
Xinjie Town, Dongtai City, Jiangsu Province

Date: 2023-03-06Read: 20

A life jacket is a type of life-saving clothing designed to resemble a vest, hence it is also known as a life vest. It is made of nylon fabric or NEOPRENE, buoyancy material or inflatable material, reflective material, etc. It is generally vest type, made of foam plastic or cork, etc., with a general service life of 5-7 years.

　National standard for life jackets: "Marine Life Jackets" GB 4303-2008

Classification: Life jackets are divided into the following four types according to common structural forms: 1) YB - vest type life jacket; 2) YTD - Hooded single-sided life jacket; 3) YTL - Hooded collar life jacket; 4) YTP - Hooded ordinary life jacket.

Marking example: Tank top life jackets are marked as: Life jackets GB 4303-2008 YB; The hooded life jacket with collar is marked as: Life jacket GB 4303-2008 YTL.

Appearance requirements for life jackets:

1. The color of the life jacket cloth should be orange red.

2. Life jackets should be able to be worn on both sides without distinction. If it can only be worn on one side, it should be clearly indicated on the life jacket.

3. The fastening of life jackets should be in the form of fasteners.

4. The accessories of life jackets should not have sharp corners, burrs, or other defects that may cause injury to the wearer.

5. Life jackets should have a detachable float rope or other device for connecting and securing different life jackets in water.

6. Life jackets should have lifting devices or accessories for pulling the wearer out of the water onto a life raft or rescue boat.

The range of chest circumference suitable for life jackets should not be less than 700mm and not more than 1350mm.

When the wearer is in a state of static equilibrium in water, the outer surface of the life jacket for sleep or above should have a medium area of no less than 400cm2 for the reverse reflective tape.

　　Quality requirements for processing life jackets:

1. The inward folding of the seam edge of the life jacket bag should not be educated by 10mm.

The distance between the visible stitching of the life jacket and the edge should not be less than 3mm, and the stitching should not have any jumping needles.

3. The density of life jacket stitching should not be less than 20 stitches per 50mm length of cotton fabric and 16 stitches per 50mm length of synthetic fiber, and the ends of the stitching should be tied back.

4. The length of the end of the life jacket strap embedded in the cloth should not be less than 30mm. The strap should have at least 3 stitches.

East PlatformcityGanghui Ship Equipment Co., Ltd. produces and sells marine oil-water separator devices,15PPMType ship bilge water separator,SWCMtypelifeSewage treatment equipment,ZCSea lifeliveSewage treatment equipment.,SWCHType marine domestic sewage split type storage tank,Fire rescue air cushion, inflatable fire rescue air cushion,Marine fuel separator.fuel supply unit.Fuel separatorunit,Assembled pressure water tank, steam heated water tank, electric steam heated water tank, pressure water tank, electric heated hot water tank,Air respirator.Positive pressure fire-fighting air respirator, self-priming air respirator, electric air supply long pipe respirator, firefighter equipment,safetyProtecting equipment,Backpack type wind powered fire extinguisher,Handheld wind powerfire extinguisher;Diving respirator device, dry and wet diving suit,Emergency escape respirator device, full mask gas mask, fire chemical protective clothing, fully enclosed heavy chemical protective clothing, fireman's fire fighting protective clothing, fireman's thermal insulation clothing, fire monitor, respirator inflation pump, portable air foam gun device, international shore connection, copper fire spray dual-use water gun, copper interface, copper fire hydrant,船用Soft ladder, boardingropeThe ladder,maneuverFire pump, immersion insulation suit,marine life jacket.New type of life jacket, old type of life jacket, inflatable typesaveRaw clothes,Fire enhanced life jackets,Marine three piece life jacket, water sports jacket, lifebuoy, lifebuoy light, life jacket light, life raft light, explosion-proof light, portable riot searchlight, strong explosion-proof flashlight, rechargeable riot flashlight, hydrostatic pressure release device, self-supporting inflatable life raft, ordinary throwing type life raft, suspended inflatable life raft,Factory style life raft,Ship gong, ship fog clock, Robertson stretcher,Platform suspension cage.Column type suspension cage.suspended basket.Fire resistant lifeline, signal balls of various specifications, marine red light signal, marine parachute, floating smoke signal, combined smoke, rope thrower, rope thrower, dry powder extinguisher, carbon dioxide extinguisher, foam extinguisher, wheeled extinguisher, fire hose, FRP fire hose box, fire equipment box, fire extinguisher box, life jacket box and other series of products. All products comply with1974The Convention for the Safety of Life at Sea2000Annual Amendments and International Life Saving Equipment TestingMSC.81(70)Requirements and relevant national standards, and obtaining the China Classification Society Ship Product Type Approval Certificate.

Last Article: The development and changes of flame retardant standards for protective clothing