-
E-mail
brand@akeparking.cn
- Phone
-
Address
Aiko Zhibo Headquarters
Guangdong Aike Zhibo Technology Co., Ltd
brand@akeparking.cn
Aiko Zhibo Headquarters
Introduction: In the daily operation of large transportation hubs such as airports and high-speed railway stations, the travel pressure caused by large passenger flows has long existed. Among them, the problem of "disorderly queuing, slow scheduling, and poor experience" in taxis has always been a pain point for passengers and a difficult point for hub operation and management.

In response to the national call for "smart transportation" construction, Aike Smart Parking, which has been deeply involved in the field of smart parking for nearly 30 years, has launched a targeted "large-scale transportation hub taxi dispatch solution". This plan is driven by the dual wheels of "intelligent hardware+operation platform", targeting the core pain points of the industry.
Taxi Dispatch Solution for Large Transportation Hubs
The plan involves constructing a "vehicle storage queue scheduling" system-”Full process closed-loop management, effectiveThe congestion and chaos in the hub area significantly improve the efficiency of taxi connections and passenger travel experience.
Partition+linkage standardization scheduling order
To achieve the storage area andThe efficient collaboration of the district is achieved through the following three modules to achieve orderly scheduling:

1. Dual zone linkage management:Clearly define the storage area andZone function. The storage area is lined up according to channels and equipped with reverse traffic barriers,Only vehicles that match the queue information are allowed to enter the area to avoid supply-demand mismatch.
2. Partition linkage scheduling mechanism:Form a closed loop through "channel binding directional guidance entrance verification". Taxi entry is bound to the designated channel and follows the designated route, guided by the dispatcherDistrict,The district uses license plate recognition to prevent unauthorized vehicles from entering.
3. Separate channel storage control:The intelligent queuing system realizes the functions of "closing the entrance when the channel is full, opening the next line, and releasing preceding vehicles", dynamically allocating traffic flow according to the capacity of the site, and alleviating congestion.
The intelligent devices used in the plan are all equipped with smart license plate recognition cameras. Based on a 5-megapixel high-definition camera and self-developed algorithms, they achieve a recognition accuracy of ≥ 99.9% and a recognition speed of 50ms. Coupled with a 0.8-second fast pole lifting barrier, they ensure that vehicles enter and exit without any lag.

For the scenario of network disconnection, by deploying the edge node main control assembly, license plate recognition, data processing, and traffic clearance can still be guaranteed when the entrance and exit are disconnected from the server, ensuring the stable operation of the system.
Platform+service deepens scheduling efficiency
The queue control center has flexible control capabilities, supports manual precise control and automatic strategy operation, and ensures safe and orderly operation through multi role and multi-level permission configuration. The system supports manual scheduling, and all dispatch release records are complete and traceable.

In addition, a short distance intelligent strategy is set up to provide drivers with a queue free compensation mechanism, ensuring their income,Optimize taxi operation scheduling to improve overall efficiency and service quality.

To deepen the quality of scheduling, the plan can also provide characteristic services for the project, with the "person vehicle area time" four-dimensional scheduling model as the core, dynamically adjusting strategies for different passenger and traffic scenarios to achieve precise matching of supply and demand.
By establishing a credit management mechanism, driver behavior records, penalty points for violations, and credit points are associated with dispatch permissions to further standardize driver operations. In addition, the system supports customized operational reports to assist in management decisions, and combines remote operations and localization teams to achieve rapid fault handling through equipment warning and automatic dispatching,Improve scheduling efficiency and service quality.
hand overConnecting Hubcase
The plan has been implemented in core hubs across the country with significant results:
Guangzhou Baiyun International Airport
The core international transportation hub in South China, with a passenger throughput of over 76.369 million in 2024, ranks among the topPosition. The core requirement of this project is to achieve orderly release of taxis in different zones, efficient transfer during peak hours, and full process linkage management through an intelligent scheduling system, comprehensively improving the passenger experience and airport transfer efficiency.

The platform has established a "four in one" dispatch system, which enables orderly taxi clearance, efficient transfer, and full process controllability, effectively responding to peak airport passenger flow and improving operational efficiency and passenger experience.
Implementation effectiveness
93% complaint rate decreased
1-2h driver waiting time shortened
40% decrease in operation and maintenance manpower
Guangzhou South Railway Station
Currently located in the southern region of ChinaThe busiest high-speed railway station has an average daily passenger volume of over 650000. Customer demand is focused on alleviating vehicle congestion and road congestion, achieving storage areas andIntelligent linkage release in the district and enhance the overall transfer experience for drivers and passengers.

By deploying an intelligent scheduling system and supporting license plate recognition, barrier gates, and internal network fiber optic connectivity, we can achieve "automatic queuing in the storage area+real-time strategic release"+The complete closed loop of command linkage effectively constructs automatic release and precisionAn intelligent scheduling system with orderly management.
Implementation effectiveness
60% increase in queuing efficiency
50% increase in traffic efficiency
63% reduction in waiting time
Changsha Huanghua International Airport
Hunan ProvinceThe aviation hub will have a passenger throughput of over 31 million in 2024, with a large flow of people. The core requirement of the project is to build a unified taxi dispatch platform that integrates multi entrance zoning queuing, short distance priority release, intelligent dispatch, and comprehensively improves the efficiency and management accuracy of hub ground transportation operations

Build a transfer mechanism that integrates diversion, scheduling, guidance, and linkage, integrate key systems, and achieve intelligent, efficient, and controllable management of the entire taxi process to solve the pain points of airport ground transportation transfer.
Implementation effectiveness
25% increase in connection efficiency
30% reduction in waiting time for passengers
90% decrease in complaint rate
In the context of the construction of a "transportation powerhouse" and smart cities, refined operation of hubs has become a trend. The Aiko Smart Park solution provides a replicable paradigm for the industry through scene insights, "software and hardware integration" architecture, and practical effects. It not only solves the problem of on-site order and efficiency, but also achieves operational refinement through intelligent platforms, helping urban transportation move towards a new level of "order, efficiency, and convenience".