The fully automatic lifting column is suitable for high-end residential villas, pedestrian streets, government agencies, bank toll stations, high-end communities, parking lots and other checkpoints that require flexible control of vehicle entry and exit. It can prevent malicious and forced entry of vehicles and ensure safety and normal order at intersections.

Product installation:

1. Installation: Find the center point at the location where the lifting barrier needs to be installed, dig a pit of the same size as the product, lay about 10cm of sand and gravel on the bottom, then place the lifting road pile so that it is level with the ground, and pour cement around the lifting road pile until it is level with the ground.

2. Installation: Find the center point at the location where the lifting stake needs to be installed, dig a pit of the same size as the product, lay about 10cm of sand and gravel at the bottom, and then place the lifting stake so that it is level with the ground. Pre embed a diameter 6-point conduit to connect to the controller, and then pour water and mud around the stake until it is level with the ground. Connect the controller to a 220V power supply.

Usage:

1. Rising: After applying pressure at the top of the column, use the key to activate and release the pressure. The column will automatically rise and lock at the highest position.

2. Lowering: Activate with the key, release the mechanical device, apply pressure on the top of the column, lower the column back to the ground, and automatically lock it.

3. Rise and fall: Press the remote control up and down buttons to operate, with a remote control distance of 50-80 meters (straight-line distance). After the equipment is powered off, the column can also be remotely lowered to the ground for consumption purposes