Guangzhou Wenlai XST/A-H1RT4A1V0 temperature digital display meter power supply AC220V parameter setting method:

1、 Product Overview: Digital Temperature Gauge XST/A-H1RT4A1V0

The XST series weighing intelligent instrument, in conjunction with various analog output sensors and transmitters, completes the measurement, transformation, display, transmission, recording, and control of physical quantities such as pressure, temperature, flow rate, liquid level, force, and displacement. The XST series instruments adopt a microcontroller embedded combination design, with strong hardware expandability and flexible software platform, which can expand switch input, timing, program sequence control, etc., not limited to standard functions. Can be combined according to actual needs to achieve performance.

2、 Functional Features

Display measured value

Clear and peel function

Digital thermometer XST/A-H1RT4A1V0 peak holding

External precision power supply, with an error of less than 5%, professionally matched with weighing sensors

8-segment line calculation function (to be specified when ordering)

Extended functions such as alarm output, transmission output, communication interface, etc. (to be specified when ordering)

3、 Main Technical Parameters: Digital Temperature Gauge XST/A-H1RT4A1V0

Power supply: 220V AC powered instrument: 220V ± 10%, power consumption less than 7VA;? 24V DC powered instrument: 24V ± 10%, power consumption less than 5VA;

Instruments powered by 12V DC: 9V~20V, power consumption less than 5VA

Other power specifications are subject to the accompanying manual

Working environment: 0 ℃~50 ℃, humidity below 90% R.H

Instruments with a wide temperature range should be specified when ordering

Display range: -19999~45000, decimal point position can be set

Display colors: green for measured values, red for set values, green for light columns, or as per order requirements

Display resolution: 1/45000

Input signal types: voltage, current, thermistor, thermocouple mV、 There are 6 types of potentiometers, among which

Voltage: 1V~5V DC, 0V~5V DC? Can be selected through settings

Current: 4mA~20mA, 0mA~10mA, 0mA~20mA can be selected through setting

Thermistor: Pt100, Cu100, Cu50, BA1, BA2, G53

It can be selected through setting, and the temperature measurement range does not exceed 400 ℃

Thermocouples: K, S, R, B, N, E, J, T can be selected by setting

Other input signals or division marks need to be specified when ordering

Basic error: less than ± 0.05% F.S

Measurement resolution: 1/60000, 16 bit A/D converter

Measurement control cycle: 0.2 seconds

Digital thermometer XST/A-H1RT4A1V0