T80 Intelligent Single Beam Measurement and Control Instrument HWP-T804-82-23-HL-P Parameter Setting

T80 Intelligent Single Beam Measurement and Control Instrument HWP-T804-82-23-HL-P Parameter Setting Method:

Suitable for: T80 Intelligent Single Beam Measurement and Control Instrument HWP-T804-02-23-HL-P Liquid Level Display

HWP-T804-01-23-HL-P Guangzhou Intelligent Single Beam Measurement and Control Instrument Parameter Setting

Calibration of Light Column Display Controller TWP-T801-01-23-HLL-P

Function calibration of TWP-T802-01-23-HLL-P light column display controller

Light column display controller TWP-T803-01-23-HLL-P digital calibration

Column display controller TWP-T804-01-23-HLL-P display value calibration

Product Features:

1. The basic error is better than ± 0.2% F · S. 16 bit A/D converter. The measurement and control cycle is 0.2 seconds, which can be increased to 0.1 seconds. 8-segment polyline function

2. Anti interference design, suppressing fast pulse group interference and other electromagnetic interference generated by relays, contactors, etc. on site, with anti-interference capability reaching level III

3. Input signals: thermistor, thermocouple, DC current, DC voltage, remote pressure gauge, etc. Special divisions such as F2 and WL should be specified when ordering

4. Dimensions: 160 × 80 (horizontal/vertical), 96 × 96, 96 × 48 (horizontal/vertical), 72 × 72, 48 × 48, as well as desktop laboratory instruments

5. Instrument power supply 220V AC, (9~30) V DC (specify when ordering)

Instruction manual for TWP-T804-01-23-HLL-P light column display controller:

0.2 level accuracy, measurement and control speed of 10 times per second, display range -1999 to 9999.

Double four digit digital display (main display+second display), where the second display can display information such as engineering units.

Universal input, selected through settings.

Optional 1-4 point alarm output. It includes five basic alarm modes: upper limit of measurement value, lower limit of measurement value, upper limit of deviation, lower limit of deviation, and deviation value, as well as five standby alarm modes corresponding to the five basic alarm modes. (Standby alarm mode: Refers to the situation where the instrument does not alarm even when it is in the alarm zone when powered on. When the measured value enters the non alarm zone, a standby condition is established and normal alarm is triggered thereafter.).

10 segment line correction function.

T804-01-23-HL-P Light Column Liquid Level Control Instrument

Adopting high brightness LED digital display and high-resolution light column display (proportional display), the display of measurement/control values is clearer and more intuitive.

Light column display controller TWP-T804-01-23-HLL-P

Both input and output circuits adopt optoelectronic isolation, with strong anti-interference ability. It can be equipped with a serial communication interface and can communicate bidirectionally with various devices with serial interfaces to form a network control system.

TWP-T804-01-23-HL-P Light Column Liquid Level Control Instrument Digital Display XST/B-F1RT4A1V0

Main technical parameters: input signal

Analog quantity • Thermocouple: Standard thermocouples - B, S, K, E, J, T, WRe3-25, etc

• Resistance: Standard thermal resistance - Pt100, Cu50, Pt100.1, remote pressure resistance: 30-350 Ω, etc

• Current: 0-10mA, 4-20mA, etc. (input impedance ≤ 250 Ω)

Voltage: 0-5V, 1-5V, mV, etc. (input impedance ≥ 1M Ω)

Output signal analog output • DC 4-20mA (load resistance ≤ 750 Ω) DC 0-10mA (load resistance ≤ 1.5K Ω)

• DC 1-5V (load resistance ≥ 250K Ω) DC 0-5V (load resistance ≥ 250K Ω) switch output • Relay control output: - ON/OFF (hysteresis)

Contact capacity (resistive load) - AC220V/3A; DC24V/3A

• Zero crossing trigger pulse output (SCR) of thyristor - can trigger 600V/100A thyristor

Solid state relay control signal output (SSR) - output DC9V/30mA

• Zero crossing trigger output of thyristor - bidirectional thyristor 600V/5A

Communication output • Standard serial communication interface