Welcome Customer !

Membership

Help

Shandong Fengtu IoT Technology Co., Ltd
Custom manufacturer

Main Products:

smart-city-site>Article

Shandong Fengtu IoT Technology Co., Ltd

  • E-mail

    2749609891@qq.com

  • Phone

    16652863761

  • Address

    Weifang High tech Zone Optoelectronic Industry Accelerator, No. 155 Guangdian Circuit, Weifang High tech Zone, Shandong Province

Contact Now
Online monitoring equipment for fish pond water quality - precise regulation of dissolved oxygen PH, Assist in scientific breeding
Date: 2025-12-25Read: 16

【 Model FT-LSZ05 】 Fengtu Technology: A professional manufacturer, dedicated team, and fast response, creating a reliable support in one. The online monitoring equipment for fish pond water quality is an important tool for scientific aquaculture, which can accurately regulate key indicators such as dissolved oxygen and pH. In terms of dissolved oxygen monitoring, the equipment is equipped with high-precision sensors that can measure the dissolved oxygen content in water in real time and continuously. When the dissolved oxygen is too low, fish may float or even die; If it is too high, it may cause bubble disease. The equipment can provide timely feedback data, and farmers can use it to turn on the aerator or adjust the breeding density to maintain dissolved oxygen within an appropriate range. For pH monitoring, the equipment is equally accurate. Abnormal pH values can affect fish growth, reproduction, and feed utilization efficiency. The device monitors and records pH changes in real-time, and will issue an alarm when it exceeds the set threshold. Farmers can adjust the pH value to an appropriate range by adding regulators or changing water. In addition, the device is easy to operate and data can be viewed remotely, making it convenient for farmers to monitor the water quality of the fish pond at any time, prevent water quality problems in advance, reduce breeding risks, and improve breeding efficiency.

1、 Product Introduction

The LSZ05 vertical water quality online monitoring station uses water quality sensors (water temperature, conductivity, pH, dissolved oxygen, ammonia nitrogen) as the core. By monitoring and analyzing various water quality parameters, and transmitting the collected data to the platform, real-time data can be remotely viewed and equipment can be remotely managed. At the same time, effective over limit alarms and intelligent processing of water quality trends can be carried out. It can also represent the comprehensive index of water quality based on the correlation and combination of real-time water quality parameters, providing customers with a large amount of objective and detailed effective data, which has practical significance for solving water pollution problems.

At present, the LSZ05 water quality monitoring station is widely used in aquaculture, sewage treatment, reservoirs, rivers and other places

2、 Product Features

1. Low power collector: static power consumption less than 1mA

2. Standard GPRS networking, support for extended Bluetooth, wired transmission

3. Support modbus485 sensor expansion

4. Solar charging management MPPT automatic power point tracking

5.1.5-meter carbon steel bracket

6. SMS alarm, send SMS to the designated phone after exceeding the limit

7. Stainless steel material protective box, corrosion-resistant, anti-oxidation, waterproof rating IP66

8. No additional processes such as wiring, building station buildings, dispensing chemicals, and personnel maintenance are required. Compared to the national standard station for water quality monitoring, it is more convenient to use and install, and the observation data is more intuitive

9. The system can integrate integrated meteorological environment monitoring data

3、 System composition

The upright water quality online monitoring system mainly consists of a foundation support (including upright poles, ground cages, ABS anti-corrosion and corrosion-resistant protection boxes), a power supply system, a monitoring host, water quality sensors, and a cloud platform.

4、 Technical parameters

serial number name measurement range Measuring principle measurement accuracy Is it standard remark
1 temperature 0~85℃ High precision digital sensor ±0.1℃
2 pH 0~14(ph) Electrochemistry (salt bridge) ± 0.1PH ±0.1℃
3 ORP -1500mv~1500mv Electrochemistry (salt bridge) ± 6mv
4 conductivity 0~10000uS/cm Contact electrode method ± 1.5%
5 turbidity 0~1000NTU scattered light method ± 1% ±0.3℃
6 dissolved oxygen 0~20mg/L Fluorescence lifetime method ± 2% ±0.3℃
7 ammonia nitrogen 0~1000mg/l Ion selective electrode method 10% of the reading, ± 0.5 ℃ Ammonia nitrogen pH integrated
pH 0~14(ph) Electrochemistry (salt bridge) ± 0.1PH,±0.1℃
8 cod 0~1000mg/ L UV254 absorption method ±5%, ±0.3℃ COD turbidity integrated; Equipped with an automatic cleaner, it can prevent biological attachment, avoid light window pollution, and ensure long-term monitoring stability; Automatic cleaning time and frequency can be set, with a power consumption of 0.7W
turbidity 0~400NTU scattered light method ± 1%, ±0.3℃
9 suspended solids 0~2000mg/L scattered light method ± 5% (depending on sludge homogeneity)
10 chlorophyll 0~400ug/L fluorescence method R2>0.999 Equipped with an automatic cleaner, it can prevent biological attachment, avoid light window pollution, and ensure long-term monitoring stability; Automatic cleaning time and frequency can be set, with a power consumption of 0.7W