Electronic water gauge: Clear and intuitive data, easily solving the problem of water level monitoring!

Equipment composition: host, water gauge section, collector, power supply system, pole

Working principle: Utilizing the weak conductivity principle of water, advanced processor chips are used as controllers to obtain water level data through measuring electrodes. After digital encoding, division, sampling, and digital processing by the CPU, the data is transmitted. Then, wired or wireless communication technology is used to send the water level data to the monitoring center or software, playing a role in real-time monitoring and early warning of water level.

Power supply method: solar power supply, 30W, 20AH

Transmission method: 2G wireless transmission, optional 4G

Installation method: Wall mounted

Equipment accuracy of 1cm (full range equal accuracy)

Resolution: 1cm

Unit section specification: 80cm

Measurement length: 80cm * 3

Communication interface: RS485 standard, optional 4G, 4-20mA, 0-5V, 0-10V

Parameter configuration: Configuration tool to configure specific parameters

Working modes: altitude mode, depth measurement mode, tilt measurement mode

Maximum power consumption: The maximum power consumption of the host is 1W, and the maximum power consumption of the water gauge section is 0.05W

Control card off: RS485 comes with a default relay output, which can be associated with any alarm event output or used for water level upper and lower limit control.

Installation drilling size: 86.2mm

Installation hole diameter: 10mm