The following are the SEW accessory related products that our company IZE_Industries has received this month. Please feel free to call to request sample materials and product information.

SEW module DEH21B SEW communication module DFP21B/UOH11B

SEW rectifier BGE1.5 8253854 SEW rectifier BG1.5 8253846

SEW brake BMG122 SEW brake pad BE3032

SEW Drive Panel DBG60B-10 SEW Cable 01995901

SEW oil seal W BASF 55X90X10-NBR SEW oil seal W BASF 50X65X10-NBR

SEW motor fan blades RIMSS2 SEW motor cover

Introduction to SEW rectifier BG series

BG brake rectifier - suitable for rack sizes of 100 and below, not suitable for rack sizes above 100

BG brake rectifier is a half wave rectifier with overvoltage protection function.

If there are no special requirements for the release response time of the brake, the rectifier is suitable for small motors. It cannot be used in situations where the ambient temperature is high or the brake cooling conditions are unfavorable.

Introduction to SEW rectifier BGE series

BGE brake rectifier - standard for 112M and above rack size motors, optional for 71 to 100 rack sizes

BGE brake rectifier is a half wave rectifier with overvoltage protection components and electronic control devices, which can shorten the response time of brake release.

The BGE rectifier improves the operation of the brake by first using magnetization to release the brake, and then firmly holding the stationary disc by reducing the magnetization strength. Due to the extremely short response time of the brake release, the brake can be released before the motor establishes torque and begins to rotate. This braking system has significant characteristics such as minimal wear, long service life, and excellent switch performance.

In the continuous release state, the current loss is reduced to a low level, so the thermal load of the brake is very low.

It is recommended to use BGE brake rectifier in the following situations:

·Requires a shorter brake release response time.

·The startup frequency is relatively high.

·When the ambient temperature is high, or when the motor is stationary or running at low speed, it is necessary to maintain a continuous release state of the brake.

Introduction to SEW brake disc BM, BMG and BE series

SEW's braking system meets strict design standards and is suitable for applications ranging from electronic applications that require simple brake retention to mechanical applications that require high dynamics and precise positioning.

DT/DV motors can be equipped with BM and BMG brakes; DR motors can be equipped with BE brakes.

Low braking motor inertia can maximize position accuracy and duty cycle.

Quick release can maximize the service life of brake pads and reduce brake pad wear

Multiple spring combinations can provide multiple braking torque options

Low radio interference to sensitive electronic devices

Damping plates can reduce noise and lower sound levels (dB)

Low energy consumption holding coil, with extremely low power consumption

Extremely low heat generation, capable of operating at higher ambient temperatures

DC coils can withstand current fluctuations from AC power sources without producing annoying braking "clicking" sounds

Low maintenance cost

• Pocket sized

Introduction to SEW oil seal

Oil seals are used to seal rotating shafts, which can protect the gearbox from external dust pollution and prevent lubricating oil leakage from polluting the production environment. The oil seal must be able to withstand variable speed operation, internal pressure of the gearbox, various temperature requirements, and a series of other working conditions.

Common models of SEW accessories:

SEW 01986341/10.0

SEW 01995901-30M

SEW 01995901-50

SEW 13324535

SEW 13324551

SEW 13324586

SEW 13327429

SEW 13327437

SEW 13354345

SEW 13354353

SEW 13354361

SEW 13354388

SEW 13354396

SEW 13421603

SEW BE05A

SEW BE05B

SEW BE11A

SEW BE11B

SEW BE1A

SEW BE1B

SEW BE1C

SEW BE2

SEW BE20

SEW BE30

SEW BE3032

SEW BE5A

SEW BE5B

SEW BG 1.2

SEW BG 1.4

SEW BG 1.5

SEW BG 2.4

SEW BG 3.0

SEW BGE 1.0

SEW BGE 1.4

SEW BGE 3

SEW BGE1.5

SEW BM30

SEW BM62

SEW BMG05

SEW BMG1

SEW BMG122

SEW BMG15

SEW BMG2

SEW BMG4

SEW BMG61

SEW BMG8

SEW BMG8(1841264)

SEW BS24

SEW BSG

SEW FBG11B

SEW DBG60B-10

SEW DRN100/DR100

SEW iBMP 3.1

SEW DFP21B/UOH11B

SEW DEH21B

SEW DFP21B

SEW DEH11B

SEW UOH11B

SEW DFE24B

SEW W AS45X75X8-NBR

SEW W B1SF55x84x8/11,5-FKM

SEW W BASF50X65X10-NBR

SEW W BASF50X80X10-NBR

SEW W BASF55x90x10-FKM

SEW W BASF55X90X10-NBR

If you need complete technical consultation on SEW, please feel free to contact Aize Industry or visit our website. We will do our best to solve your problem.