-
E-mail
671113565@qq.com
-
Phone
13761235453
-
Address
No. 265 East Street, Zhuangxing Town, Fengxian District, Shanghai
Shanghai Chengsi Intelligent Technology Co., Ltd
CSI-X071 Impact Wear Tester for Protective Clothing
Date: 2025-12-26Read: 0
CSI-X071 Impact Wear Tester for Protective Clothing
1Introduction
Test the protection of motorcycle riders against wear and tear caused by impacts while riding on gravel roads.
Intelligent control, on the control surfaceBoard isCan be set for testingFrequency and requirementsAs long as the required parameters are entered in the console, the machine will automatically cycle through testing. During the testing process, you can pause the test at any time, open the safety door, and observe the degree of sample loss；
Adopting servo drive, the motor response time is short, without speed overshoot or uneven speed phenomenon；
2、 Key parameters
Parameter items |
specification |
control system |
industrial-gradePLC |
interface |
colorful7-inch touch screen, switching between Chinese and English |
Operation method |
Full touch operation, capable of setting, calling, and modifying test programs |
printer |
Embedded printer |
Belt transmission speed |
8m/s |
The hardness of the belt |
granularity OP60 |
Wear area |
1963mm2 |
Apply force to the sample |
49N |
Net pressure on the sample |
25kPa |
Falling height |
50mm |
Sample holder |
diameterΦ75mm |
cleaning brush |
diameterΦ200mm， Polypropylene bristles 0.2mm, free length 45mm; |
USB testing software socket, capable of reading data and connecting to a computer | |
IIIexecuteStandards and Applicable Scenarios
Compliant with standards:
strictly adhere toGB/T24278-2019 ；
Batch quality inspection of production line;
Third party laboratory certification.
4、 Configuration List
host1 unit;
instruction manual1 copy;
Certificate of Conformity1 copy;
Warranty Card1 copy;
Delivery Receipt1 copy;
nameplate1 piece;
power cord1 piece;
wrench1 set;
Several brochures;
5Maintenance
The device is not suitable for a long time, please cover it with a dust-proof cloth
The surface of the machine should be cleaned before and after the experiment every day to maintain cleanliness