-
E-mail
1234065@qq.com
-
Phone
17749779099
-
Address
2392A, 1st Floor, 199 Shiyi Road, Baoshan District, Shanghai
Shanghai Hanshi Electric Automation Equipment Co., Ltd
1234065@qq.com
17749779099
2392A, 1st Floor, 199 Shiyi Road, Baoshan District, Shanghai
Overview of EOCR-SP
✔ Built in MCU (Micro Processing Controller)
✔ Can be directly connected to all electronic contactors (MCs) at home and abroad
✔ Multiple protection functions
✔ Confirmed operating current: red LED
✔ Confirm the function of operation display and operation reason; Red/Green LED
✔ Manual (immediate)/Automatic (remote) reset
✔ Environmental Applicability
✔ ultra-low power
✔ No voltage release function (power-off protection function/fail safe operation) - N type
✔ SP is universal for single-phase/three-phase, while SP1 and SP2 are dedicated for three-phase
EOCR-SPComprehensive Data Sheet for Series Contactor Direct Insertion Digital Overload Relay
Basic Information | |
brand |
Schneider |
Product Series |
EOCR |
place of origin |
South Korea (Schneider Electric Yishan Factory) |
Authorized General Agent in China |
Shanghai Hanshi Electric Automation Equipment Co., Ltd |
Product Name |
EOCR-SPSeries contactor direct insertion digital overload relay |
Main applications |
Motor overcurrent protection |
protection function |
overload phase loss locked-rotor Note: Phase loss/locked rotor protection is activated by overcurrent,The phase loss protection time of EOCR-SP40 is 4 seconds (only protecting L1 and L3 phase loss) |
Current setting range |
01：0.3 – 1.5 A 10：1 – 10 A |
Contact status |
NWhen the coil is energized and closed during normal operation, it will be disconnected upon power failure. It is commonly used for emergency stop/safety disconnection circuits RWhen the coil loses power during normal operation, it closes (Fail safe) and remains closed even after power failure, saving power and ensuring stable signal |
action characteristics |
Time limited O-TIME (adjustable from 0.5 s/1-15 s) |
reset |
Manual button reset/remote electrical reset 0-1 s |
Instruction method |
Dual LED status indicator (green LED=power supply; Red LED=Trip) |
power consumption |
2 W |
Electrical specifications | |
Control power supply [Us] |
B：24 V AC/DC F7：85 – 150 V AC M7：180 – 260 V AC |
Network type/frequency |
AC，50–60 Hz |
Rated working voltage [Ue] |
600 V AC (UL) / 690 V AC (CSA, IEC 60947-4-1) |
Rated impulse withstand voltage [Uimp] |
6kV, compliant with IEC 60947-4-1 |
Output contact |
1 × SPDT， 250 V AC 5 A (resistive) |
Continuous current [Ith] |
5 A |
Mechanical and Installation | |
Installation Method |
Direct insertion contactor |
Wiring specifications |
Control circuit: 2 × 1... 2.5 mm ² (without end/M3.5) Main circuit: 1 × 2.5... 16 mm ² (without end/M4) |
Tightening torque |
Control terminal 1.7 N · m; Main circuit 1.7-2.5 N · m |
Overall dimensions |
01 / 10 / 20：59.5 (H) × 47 (W) × 70 (D) mm 40：64 (H) × 56 (W) × 80.5 (D) mm |
weight |
0.155 kg |