Product ordering instructions:
　　
When the user has determined the valve type and model (especially non-standard models), the user should correctly explain the meaning and requirements of its model.
　　
2. Users should place orders based on the product models listed in the sample. If there are special requirements for the product items, please specify them in the order:
　　
1) Structural length 2) Flange standard 3) Valve structural form: such as full or reduced channel diameter, body cover connection form 4) Valve internals and other material requirements 5) Pressure testing, inspection standards, labeling, and other requirements;
　　
3. When the application of Shuangjia valves is very important or the environment is complex, please provide design drawings and detailed parameters as much as possible, and the technical department of Shuangjia valves will review and control them for you.
　　
4. Shuangjia valves (:) can be configured with electric devices, pneumatic drive devices, and turbine devices according to specific user requirements.
　　
5. All types of valves produced by Shuangjia Valve Factory can meet the requirements specified in the order, and the products are strictly inspected and tested according to the relevant standards before leaving the factory.
　　
6. The warranty period for all products of Shuangjia Valve is within 18 months of formal installation and use by the customer.

Control signal:DC1-5V or 4-20mA

1Steam proportional integral valve Overview

Steam proportional integral valveIt is a pressure balance regulating valveAdopting cage type sleeve guidance and single seat sealing structure, equipped with multiple spring actuators or electric actuators, the flow channel is S-shaped, and imported sealing rings are selected. Overall, it has the characteristics of stable operation, large allowable pressure difference, and low flow characteristic noise. Especially suitable for working environments that allow for small pressure differences and large pressure differences before and after valves. This series of products includes various types such as room temperature type, high temperature type, low temperature type, adjustable cutting type, and corrugated pipe sealing type.Steam proportional integral valveThe nominal pressure rating isPN1.6、 4.0 6.4, 10.0; Valve body diameter range DN20-DN300; Suitable for various grades within the fluid temperature range of -150 ℃ to+560 ℃; The leakage level atmosphere is divided into four levels: level IV, level V, and level VI; The flow characteristics include straight lines and equal percentages. Multiple specifications to choose from

IISteam proportional integral valveMain component materials and structural diagrams

IIISteam proportional integral valveValve cover form

Note: Room temperature type: Working temperature of room temperature type-20-+200 ℃, leakage level IV.
High temperature valve cover with added heat sink, which can be used for medium temperature-At temperatures between 60 and 450 ℃.
The bellows sealing type forms a * seal for the valve stem that moves up and down, blocking fluid leakage.
The low-temperature type adopts an extended valve cover and insulation board structure, which can be used for-196 ℃ deep cold environment.

4Steam proportional integral valveMain technical parameters

5Steam proportional integral valve Electric actuator

1. Main performance parameters of electric actuator

2electric regulating valveMain performance indicators

3. Allowable pressure difference

noteThe actual configuration needs to be determined based on specific process parameters. If the pressure difference is allowed to be clear or the maximum working pressure difference exceeds the list range, please contact us and take appropriate measures to solve it

VISteam proportional integral valveMain external dimensions

Note: The dimensions in the table are without standard attachments. Due to possible changes in product improvement technology innovation parameters, please consult the company's technical department for data.