Explosion proof mosquito killer lamp is a mosquito killing device designed specifically for hazardous environments with flammable and explosive gases or dust, which can safely and effectively kill mosquitoes through physical means. Suitable for industrial places with flammable and explosive gases or dust, such as petrochemical, food processing, pharmaceutical workshops, warehousing and logistics, and spraying operations. It can also be used in high humidity and corrosive workshop environments, such as electroplating, brewing, sewage treatment, and other areas.

Choosing the explosion-proof mosquito killer lamp that suits oneself should revolve around the explosion-proof requirements of the usage environment, combined with mosquito killing methods, product quality, and other aspects to match one's own scene. Specific measures can be taken from the following aspects:

Match usage scenarios and explosion-proof levels

Explosion proof rating is the core indicator of this type of product, which must be adapted to the hazardous environment, and the protection level and coverage area must be confirmed based on the scenario. For example, in petrochemical facilities, flammable and explosive gases are often present, and products with Exd II BT4 or higher grades should be selected; In environments with high levels of dust, such as flour mills, corresponding explosion-proof models for dust are required. For outdoor or humid electroplating and sewage treatment workshops, the protection level should be at least IP54. If frequently exposed to rain, priority should be given to IP65 or above to avoid damage caused by moisture. In terms of space, small car rooms under 80 square meters can choose products with a power of 15-20 watts. Large factory buildings can select multiple low-power devices for distribution and installation, which is more uniform than a single high-power device for mosquito control.

Select mosquito killing methods as needed

Different mosquito killing methods should be adapted to different environmental requirements, taking into account whether sparks are avoided on site and the tolerance of cleaning difficulty. Electric shock mosquito killing has high efficiency, but may generate weak sparks during operation, and is only suitable for scenarios where explosion-proof structures have been strictly certified and there are no extremely sensitive explosive media; The adhesive capture method has no sparks or noise throughout the process, and can also avoid secondary pollution caused by mosquito and insect body splashes. It is particularly suitable for places with high hygiene and safety requirements such as food processing and pharmaceutical workshops, but the adhesive paper needs to be replaced regularly.

Pay attention to material and installation convenience

In terms of material, priority should be given to products with 304 or 316 stainless steel shells. These materials are corrosion-resistant, rust proof, and can withstand the humid environment of food processing or corrosive gases in chemical sites. They are much more durable than ordinary iron sheet spray painted products. In terms of installation method, the workshop can be lifted and hung by the operator at high places, which does not occupy the working space; The open area of the wall is suitable for wall mounted, firmly fixed and does not affect equipment handling; If there is sufficient ground space, a floor standing design is more convenient for moving positions and can be flexibly selected according to the layout of the workshop.