2.5T/H water purification system, reverse osmosis water treatment equipment, industrial reverse osmosis pure water machine

1、 Introduction to reverse osmosis water treatment equipment:

Reverse osmosis is a precision membrane based liquid separation technology that applies operating pressure on the inlet side to overcome natural osmotic pressure. When the operating pressure is higher than the natural osmotic pressure and is applied to the concentrated solution side, the natural flow direction of water molecules will reverse, and some of the water molecules in the inlet will become purified water on the dilute solution side through the reverse osmosis membrane;Reverse osmosis equipmentCan block all soluble salts and molecular weights greater than100Organic matter, but allowing water molecules to pass through, the desalination rate of reverse osmosis composite membranes is generally greater than98%, inion exchangeThe use of reverse osmosis equipment can significantly reduce the discharge of water and wastewater during operation.

2、 Reverse osmosis water treatment equipmentPerformance characteristics:

1. High desalination rate, low operating pressure, improved system efficiency, and reduced operating costs.

2. System desalination rate95%Above, the desalination rate of a single membrane can reach99%The product has a high degree of standardization.

3. Based on user requirements, investigate the actual situation and make reasonable designs.

4. OnlineCONDUCTIVITY METERContinuous monitoring of product water quality with set values and alarm system.

5. Low voltage switch protection prevents damage to equipment in abnormal conditions and ensures the normal operation of the system.

6. Both product water and concentrated water are equipped with flow meters to monitor the system recovery rate and adjust the effluent and water volume.

7. Pre stage multi-stage pre-treatment protection device ensures that the high-pressure pump and reverse osmosis membrane are not damaged.

3、 Reverse osmosis water treatment equipmentworking principle:

water treatment equipmentAfter being applied in reverse osmosis systems, it utilizes the electrodes at both ends of the module to move charged ions in water and cooperates with themion exchange resinAnd selective resin membrane is used to accelerate ion movement and removal, achieving water purification, and the water production resistivity can reach15--18M.

4、 Reverse osmosis water treatment equipmentTechnical parameters:

1. Input power supply voltage:220V/380v 50-60Hz

2. Inlet water temperature:10-45℃

3. Inlet conductivity:<700mg/L

5、 Reverse osmosis water treatment equipmentPurpose:

Manufacturing electronic industrial products such as monocrystalline silicon semiconductor integrated circuit blocks, picture tubes, glass shells, liquid crystal displays, etcIndustrial pure waterUltra pure water.

Water used in the pharmaceutical industry: water used in pharmaceutical and formulation processes, medical hemodialysis, biochemical analysis, infusion, etc.

To produce heat and power generation boilers, as well as feed water for medium and low-pressure boilers in factories and mining enterprisessoftened water、Desalinated pure water.

Produce purified drinking water, distilled water, mineral water, and mineralized water for the beverage industry.

Related searches:What is the composition of reverse osmosis water treatment equipment Troubleshooting of RO reverse osmosis purified water treatment equipment Introduction to the working principle of industrial pure water equipment