Detailed information on FS-2 adjustable high-speed electric disperser:

• Instrument characteristics
  1. Adopting an internal suction dispersion structure, with high speed, it can efficiently disperse, emulsify, and extract trace organic compounds, lipophilic substances, and organic solvent soluble substances between two immiscible liquids in water.
  2. The tissues of various animals and plants can achieve the purpose of dispersion and mixing.
  3. Can cause cell rupture until nuclear separation, and can use different speeds toDNAChain breakage, or breaking large molecular substances into small molecular substances.
• Technical Parameter

Motor speed:2000change/divide

1. Large dispersion knife:8000-18000change/divide
2. Small dispersing knife:8000-20000change/divide

Continuous working time: ≤5minute

Power:185W

Power supply voltage:220V±10% 50Hz

Environmental temperature:-10~45℃

Whole machine weight:10Kg

Non professional size:200×350×450（mm）

• Instrumentation

The instrument is placed on a horizontal workbench, and the required dispersing tools for installation must be in place. When connecting the power to test the machine, first use a cup or vessel filled with water to submerge the plum blossom blade in the water. Turn on the power switch, adjust the speed knob slowly to quickly, and there should be no obvious metal friction sound (if there is a metal friction sound, please refer to the figure)1Turn off the switch and release the support tool6m/mTighten the support screw to randomly rotate the external fixing sleeve upwards and install it in place, then tighten it. ）Work can only begin after completion.

Cut the plants or organisms that need to be experimented into small pieces, place them in a randomly equipped glass container, clamp them in the middle of a magnet bracket (seven shaped), and release the fixed motor yesterday8m/mTighten the support screw and slowly align it with the mouth of the vessel, moving it downwards until the dispersing blade is at the bottom of the vessel2-3m/mFor the sake of profit, tighten it again8m/mScrew, the working time of each experiment should not exceed5minute.

• instrument maintenance

After long-term use, the polyethylene inside the high-speed disperser tool is a worn part for users to replace, as shown in the figure2It is a dispersed knife assembly program.

Attention: After each work is completed, remove the cutting tools and rinse them with clean water to dry.

First, insert the dispersing head into the polyethylene. At this point, the dispersing head step exceeds the sleeve length0.2Millimeters, if you find that the sleeve is too long, you can use a file to file the small end to the size, then manually press the polyethylene sleeve into the fixed head, and then insert the dispersing head into the sleeve. At this time, the dispersing head must be able to rotate freely in the sleeve. If you find that the sleeve is tight, you can use5Insert the drill bit into the sleeve and pull it, then insert the dispersing head into the sleeve and tighten the small rotating shaft (see attachment)1and2When twisting, the force must be appropriate, otherwise it may cause tooth slippage. Then tighten the fixing sleeve and fixing head.