Authentic Vuototecnica solenoid valve vacuum generator vacuum pump

③ The shape of the bracket is specially designed to fit with the vacuum cup and is equipped with external threaded pins for easy fixation to the automation device.

④ These cups are very easy to replace. When requesting spare parts, only the cups for the required compounds indicated in the table need to be requested. Special compound cups (listed at the top) and support frames made of different materials can be provided according to the requirements.

Vacuum valve and solenoid valve:

① The suction valve is designed for rapid vacuum connection on the press bag of composite fiber products.

② These valves consist of a steel distributor that will be inserted into a bag and equipped with a cam housing suitable for quick vacuum connection. The latter is made of reeds and anodized aluminum, and once inserted into the distributor, it can be easily connected by rotating it 90 ° along its axis.

③ Place the silicone sealing ring between the two components and the pressure bag to ensure a vacuum seal. Manual two-way valves, quick couplings, or simple flexible fittings can be assembled onto these valves. They currently have two versions as shown in the table, but different sizes and shapes can be provided according to requirements.

Suction filter:

① The small online filter retains impurities and very fine dust, which interferes with the flow rate in a negligible way. Due to their reduced size, they can be directly installed on vacuum pipelines, close to public facilities such as vacuum cups, vacuum clamping systems, etc., for graded filtration and better visual control of the suction points of all equipment.

② They consist of a cylindrical transparent organic glass body, which is enclosed by two anodized aluminum flanges fixed in place by Seeger rings, where all threaded male or female connections and seals are located. There is an internal filter element with a filtration degree of 7 μ. It is made of specially treated paper and pleated to increase the filtration area. Simply remove one of the two flanges to inspect the filter. Due to the use of paper filter elements, it is not recommended to use these filters in the presence of water, oil vapor, or condensate.