BXK explosion-proof control box quotation

NegotiableUpdate on 02/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The BXK explosion-proof control box quotation is designed and manufactured according to GB3836.1-2. The distribution box is mainly used in Zone 1 or Zone 2 areas with explosive mixtures of Class II, Grade B, T4 group and below explosive hazardous areas.

Product Details

　　BXK explosion-proof control box quotation-Introduction

Product Model and Significance

B XK - □ □ □ □

Number of switches (without adding 0)

Number of signal lights (without installation, add 0)

Number of ammeters (without adding 0)

Number of buttons (without adding 0)

control box

explosion-proof

　　BXK explosion-proof control box quotation-Scope of application, suitable for environments with temperature groups T1-T6, as an AC 50Hz, rated voltage up to 380V, long-distance control signals, electrical, etc. in the line, and with signal indicator lights.

Basic Parameters

Rated voltage: 380V

Rated current: 5A

The explosion-proof mark of the control box is dIIBT4;

The maximum outer diameter of the cable used for the control box inlet is 26mm;

The on-site explosion-proof operation box can work reliably in the following situations

The upper limit of the surrounding air temperature shall not exceed+40 ℃, the lower limit shall not be lower than -20 ℃, and the average value within 24 hours shall not exceed+35 ℃;

The altitude of the installation location shall not exceed 2000m;

3. In areas without significant shaking, vibration, or impact;

The average relative humidity in the most humid month at the installation location should not exceed 95%, and the monthly average temperature for that month should not be lower than+25 ℃;

Pollution level 5 is level 3;

Installation categories are II and III;

7 Protection level: IP54.

4. Main structure and external installation dimensions

main structure

The control box shell is made of ZL102 cast aluminum alloy for explosion-proof main chamber and wiring chamber. The main chamber is equipped with buttons, signal lights and other components, which can be operated through the operating mechanism and shell handle, and have indicator lights displayed. There are wiring terminals connected to the main chamber in the wiring chamber, as well as cable entry devices and internal and external grounding screws.