BXX8060 series three proof, anti-corrosion and explosion-proof distribution box

Manufacturer's supply:BXX8060 series three proof, anti-corrosion and explosion-proof distribution box

Product features:

1. The shell adopts an increased safety structure and is made of glass fiber reinforced unsaturated polyester resin Made of pressed SMC, it has a beautiful appearance and is corrosion-resistant, impact resistant. The joint surface between the heat stable shell and the cover is a curved labyrinth structure, ensuring a high level of protection or ZL102 aluminum alloy die-casting. The surface is high-pressure electrostatic spray coated, and the stainless steel fasteners are exposed;

2. It has waterproof, dustproof, anti-corrosion and other properties;

3. Internal components: miniature circuit breaker, molded case circuit breaker, waterproof and dustproof distribution box. Number of poles: 1P, 2P, 3P, 4P, 1PL, 2PL, 3PL, 4PL

Ordering Notice

When placing an order, the user must specify the number of circuits in the distribution box, the corresponding current of each circuit, and the number of poles of the circuit breaker, etc.

2. Provide electrical system diagrams if necessary.

3. If there are special requirements, please provide written explanations;

4. The imported explosion-proof components are produced with advanced technology, which are beautiful, exquisite, and durable;

5. Vertical or hanging installation, can be customized if there are special requirements;

6. Complies with the requirements of GB3836-2000 and IEC60079 standards.

Main technical parameters:

1. Explosion proof mark: Exced Ⅱ CT6

2. Protection level: IP65

3. Anti corrosion grade: WF2,

4. Usage category: AC-3, AC-4

5. Rated voltage: 220V/380V,

6. Rated current: 10A,

7. Cable outer diameter: Φ 12mm to Φ 17mm,

8. Inlet thread: G1 "

9. Indicator light voltage code: a: AC/DC12-36V, b: AC/DC48-100V, c: DC220V, d: AC200-380V

10. Indicator light color code: R: red, G: green, Y: yellow, W: white

11. Button contact type code: Ⅰ: One normally open and one normally closed Ⅱ: Two normally open Ⅲ: Two normally closed.

Purpose and Scope of Application

The BXX8050 explosion-proof and anti-corrosion maintenance box (hereinafter referred to as the maintenance box) is suitable for use in locations with explosive gas mixtures (Zone 1 and Zone 2) of Class IIC, T6 and below. It is used to connect lighting fixtures and small handheld electric tools in circuits with AC 50Hz, voltage up to 380V, and branch current up to 30A.

The maintenance box is designed, manufactured, and inspected in accordance with relevant standards such as GB3836.1 "General Requirements for Explosion proof Electrical Equipment for Explosive Environments" and GB3836.2 "Explosion proof Electrical Equipment for Explosive Environments - Explosion proof Electrical Equipment" d ".

Meaning of Model 2

BXX 8050－ □/16 □ □ WF2

Outdoor anti-corrosion

Inlet direction D: upward inlet

X: Offline entry line

K: With main switch (without note)

rated current

Number of circuits

Introduction code

Explosion proof maintenance box

Structural Overview

The outer shell of the maintenance box is made of engineering plastic, and the lower end of the box is equipped with a cable entry device. Used for power supply incoming line.

The plug is made of engineering plastic. The overall structure is divided into two parts: plug and socket. The socket is connected to the power supply, and the plug is connected to the electrical equipment. There are opening and closing indicators on the socket. The grounding contact of the plug is longer than the main contact, so the grounding wire should be connected before the main contact is connected. When unplugging, disconnect the grounding contact to ensure safety. After inserting the plug, the rotating sleeve on the plug rotates to the right by a certain angle to turn on the power, and the plug cannot be unplugged at this time; On the contrary, rotating the plug to the left by a certain angle will disconnect the power supply, and the plug can be unplugged at this time. The socket is equipped with a protective cover. After the plug is unplugged, the protective cover covers the socket to prevent foreign objects from entering.

Professional production, excellent quality, and thoughtful after-sales service ensure that you can buy with confidence and use with ease. Leon Electric is an electrical expert.

Carefully carry out every process. Only by making products with dedication can we make good products. Because of professionalism, we trust, and because of quality, we choose Leon Electric, a lighting expert.

Sales area:

Liushi, Yueqing, Wenzhou, Shanghai, Jiangsu, Zhejiang, Guangdong, Beijing, Tianjin, Shandong, Guangxi, Hebei, Hunan, Shaanxi, Henan, Jilin, Jiangxi, Heilongjiang.

Fujian, Shanxi, Sichuan, Anhui, Xinjiang, Gansu, Qinghai, Guizhou, Liaoning, Chongqing, Inner Mongolia, Xizang, Hainan, Shandong, Qingdao, Changzhou, Hefei, Zhengzhou.

Shanghai, Tianjin, Guangzhou, Shenyang, Taiyuan, Zhengzhou, Hangzhou, Suzhou, Kunming, Nanjing, Shenzhen, Xiamen.

Wuhan, Changsha, Jinan, Yantai, Datong, Nanning, Dalian, Harbin, Xi'an, Lanzhou, Yinchuan, Xining, Chengdu, Chongqing, Changchun Quanzhou and other places.

Wenzhou Leon Electric Co., Ltd. - Convenient for Your Choice

Manufacturer's supply:BXX8060 series three proof, anti-corrosion and explosion-proof distribution box