COL6 | Fiber collimator

The COL6 fiber collimator produced by Shanghai Wenyi Optoelectronic Technology Co., Ltd. has FC/PC or FC/APC interfaces and a lens diameter of 6mm; It can be used for single-mode or multi-mode fiber jumpers, with alignment wavelengths ranging from 360 nm to 1620 nm. Depending on the wavelength, each collimator is factory aligned to simplify the fiber coupling detection system, using a stainless steel casing. Used for collimating light emitted from FC connector fibers and possessing diffraction limited performance. These fiber collimators can be fine tuned for focal length by loosening the screws on the side. The product has a compact structure and is easy to integrate into existing devices. Because non spherical lenses produce chromatic aberration, the effective focal length (EFL) is wavelength dependent.

The product has a small size, is easy and simple to use, and has a wide range of wavelength selectivity, making it suitable for various optical applications! The lens of this collimating lens is a non spherical lens with a diameter of 6mm and a focal length of 15mm. It can be connected to jumper cables with an output optical power of less than 10w!

This product introduction:

Connector: FC/APC or FC/PC;

External thread: M11 x 0.5

Lens diameter: 6mm

Lens focal length: 15 mm

Optical parameters: a non spherical lens

Wavelength range: Based on the wavelength of the anti reflective film, please refer to the model table for details

Working temperature:- 40~150 ℃

Shell material: stainless steel.

This product can be used for fiber optic collimation or coupling focusing; For collimation purposes, it can be connected to single-mode or multi-mode optical fibers; If used for coupling focusing, it is limited to connecting multimode optical fibers (numerical aperture 0.12~0.22NA, core diameter ≥ 50 microns).