Constant temperature rotary viscometer DHJ-5S+DH-25A

When the temperature deviation is 0.5 ℃, some liquids have viscosity values that deviate by more than 5%, and temperature deviation has a significant impact on viscosity. As the temperature increases, viscosity decreases. So special attention should be paid to keeping the temperature of the measured liquid constant near the specified temperature point, and for accurate measurements, it is best not to exceed 0.1 ℃ For this purpose, our company specializes in producing constant temperature cups and baths to be used in conjunction with DHJ series viscometers.

When the temperature deviation is 0.5 ℃, some liquids have viscosity values that deviate by more than 5%, and temperature deviation has a significant impact on viscosity. As the temperature increases, viscosity decreases. So special attention should be paid to keeping the temperature of the measured liquid constant near the specified temperature point, and for accurate measurements, it is best not to exceed 0.1 ℃ For this purpose, our company specializes in producing constant temperature cups and baths to be used in conjunction with DHJ series viscometers.

model	DHJ-5S
measuring range	1 ~1×105mPa.s
Rotor specifications	The 1-4 rotors are equipped with the 0 rotor, which can measure low viscosity up to 0.1mPa. s
Rotor speed	3. 6, 12, 30, 60 revolutions per minute
measurement accuracy	± 2% (Newtonian liquid)
power supply	AC 220V ± 10% 50Hz ± 10%
work environment	Temperature 5 ℃~35 ℃, relative humidity not exceeding 80%
External dimensions	370×325×280mm
net weight	6.8kg

model	DH-25A
temperature range	Room temperature+10-100 (℃)
temperature fluctuation	±0.05(℃)
temperature control	Microcomputer temperature control and PID regulation
display resolution	0.01(℃)
Inner container capacity	4(L)
Opening size (length x width x depth)	160 × 120 × 130 (length × width × depth) (mm)
Pump circulation mode	Internal/External Circulation
pumping flow	6(L)
Heating method	Heating pipe
External dimensions	250×140×150

host	One unit
1. Rotors 2, 3, and 4	One set (note: rotor 0 is optional)
The power adapter	a set
Protective frame	One
base	One
Lifting column	a set
operation instructions	a copy
certificate of conformity	a copy
Guarantee	a copy
Hexagonal panel head	One
Wrench	Two (note: one size each)