Welcome Customer !

Membership

Help

Jiangsu Linyang Energy Co., Ltd. Marketing Department
Custom manufacturer

Main Products:

smart-city-site>Products

Jiangsu Linyang Energy Co., Ltd. Marketing Department

  • E-mail

    market@linyang.com

  • Phone

  • Address

    No. 666 Linyang Road, Qidong Economic Development Zone, Jiangsu Province

Contact Now

DJTZ23-TLY2210 Concentrator Type I

NegotiableUpdate on 09/11
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Adopting industrial grade ARM9 series system motherboard and LINUX operating system. Excellent electromagnetic compatibility performance, capable of withstanding high-voltage spike pulses ..

Product Details

  • Q/GDW 1373-2013 "Functional Specification for Power User Electricity Information Collection System"

  • Q/GDW 1374.2-2013 "Technical Specification for Power User Electricity Information Collection System Part 2: Technical Specification for Centralized Meter Reading Terminal"

  • Q/GDW 1375.2-2013 "Technical Specification for Power User Electricity Information Collection System Part 2: Concentrator Type Specification"

  • Object oriented Data Exchange Protocol DL/T698.45-2017

  • Adopting industrial grade ARM9 series system motherboard and LINUX operating system.

  • Excellent electromagnetic compatibility performance, able to resist interference from high voltage spikes, strong magnetic fields, strong static electricity, lightning surges, and has a strong range of environmental adaptability.

  • The uplink communication with the main station adopts public network mode, compatible with communication methods such as PSTN, GPRS/CDMA, 230 radio, etc.

  • Downstream communication can use low-voltage power line carrier, low-power wireless, or 485 bus communication.

  • The wide voltage range design makes it more reliable and adaptable to the working environment.

  • New maintenance concept: With powerful configuration capabilities, device parameters can be easily modified locally/remotely, and online software upgrades are supported.

  • The large capacity motherboard FLASH storage chip ensures convenient storage of various data.

  • Sealed design, using waterproof and flame-retardant materials, wall mounted structure, lightweight and easy to install.

Working Voltage

Three phase four wire: 3 × 220/380V

frequency

50Hz, Allowable deviation -6%~+2%

power consumption

Active power consumption ≤ 5W (non communication), apparent power consumption ≤ 10VA (non communication)

temperature

-40℃~+75℃

humidity

Relative humidity 10% -100%

atmospheric pressure

63kpa~108kpa (relative altitude below KM)

Electrostatic Discharge

8kV

EFT

4kV (power circuit)/2kV (signal circuit)

surge

4kV (common mode) 2kV (differential mode)

Impulse Voltage

6kV

power frequency withstand voltage

2kV

display

160 × 160 LCD display of Chinese characters and graphics

keyboard

6 keys

Flash storage

2Gb

Second output

1 Road

Remote signaling input

4 routes

4G

Network type: Supports three telecom operators, China Mobile, China Unicom, and China Telecom, with seven communication modes including GPRS, TD-SCDMA, CDMA, CDMA 2000, LTE-FDD, WCDMA, and TD-LTE.

Antenna impedance: 50 ohm impedance characteristic (SMA interface)

Data transmission rate: Baud rates support 9600, 19200, 38400, 57600, 115200bps (default)

Support automatic baud rate detection function

Support sending AT commands and data through serial port

Transmission power: GSM/GPRS:
Power level 4 (2W): EGSM900
Power level 1 (1W): DCS1800
EDGE:
Power level E2 (0.5W): EGSM900
Power level E1 (0.4W): DCS1800
UMTS:
Power level 3 (0.25W): WCDMA
Power level 3 (0.25W): CDMA2000
Power Level 2 (0.25W): TD-SCDMA
LTE:
Power Level 3 (0.25W): LTE

Data and clock retention time

>10 years

Important configuration parameters

Permanently retained (stored in Flash)

Overall dimensions

290mm (length) × 180mm (width) × 95mm (height)