Details of the FT-8400 series insulation powder resistivity tester

NegotiableUpdate on 05/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Details of the FT-8400 series insulation powder resistivity tester

Product Details

Function Overview:Functional overview

1. The measuring range of range resistance can measure up to 10 ^ 16 Ω

FT-8400 series insulation powder resistivity tester details introduction

2. Adopting integrated circuit modules; Integrated structural design

3. USB， 232 communication interface, DC constant voltage source,

4. Using PC software operation,

5. Analysis of data curves and graphs during automatic testing process

6. Report generation, storage, and printing

working principle:

The powder sample placed in the solid mold is subjected to pressure changes, resulting in volume compression. During the compression process, the changes in resistance and resistivity of the powder sample during the volume change process are measured in real time, until it is compacted to a stable volume state; The porosity is very small and close to zero

Resolve the human error caused by the inability to shape powder samples into tablets or by measuring them after compression

Application Description:

When the powder is compressed until it reaches a steady state, the porosity of the powder is small, and the compacted density is close to the true density state. At this time, the tested powder conductivity is close to the theoretical value

1. Described the trend of changes in electrical properties of insulating powder during the compression volume change process

2. Describe the curve diagram of the rebound deformation or recovery process of the compressed insulating powder due to its inherent cohesive force during the pressure reduction process

Scope of application:Scope of

application

1. Application: Measurement and analysis of insulation powder particles with similar properties, such as plastic powder, coatings, resin powder, chemical powder, rubber powder, etc

2. Used for measuring and analyzing static electricity generated by changes in cohesive force during compression of insulation powder

3. Used for enterprise quality inspection; R&D department, colleges and universities; Research institutes; And quality inspection agencies

3、 Models and indicators	indicators：	Specification and model
FT-8400A	10⁴FT-8400B¹³1. Resistance range	Ω～1×10
Ω	10⁴104Ω ～1×1016Ω¹³2. Range of resistivity	Ω～1×10
Ω-cm	104 ～ 2.0×1016 Ω-m
3. Test voltage	0-1000V
4. Resistance accuracy	＜1G ±1% ; ≥1G ±3%; ≥1T ±10% ; ≥ 10T ± 20% (standard resistance)
5. PC software interface	Resistance, resistivity, unit switching, current, voltage, thickness
Graph display, pressure setting, pressure, report export, waveform refresh, time setting, start, stop, run	compacted density
6. Testing methodThe testing powder adopts the two electrode method, (solid materials can be externally connected with a three ring electrode method)7. Mold	Standard mold inner diameter 10mm; other specifications can be customized
8. Pressure range	choose and buy
:	a.200kg； b.300kg； c.500kg； d.1000kg
9. Mold cavity stroke:	0-20mm
10. Sample height	Automatic real-time sample height to thousandth range: 0.001-10000mm, measurement resolution 0.001mm, can measure sample compression thickness of 0.1mm
11. Constant pressure time:	0-99.9s
12. Temperature and humidity range	Normal temperature -50 degrees; Humidity: 20% -98%/
13. Standard parts as standard	a. One standard calibration resistor; b. 1 standard height calibration piece
14. Testing method	a. Automatic measurement b. PC software interface operation
15. Pressurization method	Automatic operation
16. Demoulding method	Automatic operation
17. Electrode Material	Copper electrode
18. Vacuum cleaning system	External vacuum cleaner processor
19. Error:	1% -15% is subject to different material characteristics and range errors 20. Working power supply: