Product Categories

Ningbo Ruike Weiye Instrument Co., Ltd

E-mail
Phone
13806673976
Address
Zhejiang Ningbo Jiangbei District No. 58, Lane 225, Kaiyuan Road, Hongtang Industrial Zone C

FT-301 series automatic conductor powder resistivity tester (multifunctional type)

NegotiableUpdate on 05/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

FT-301 series automatic conductor powder resistivity tester (multifunctional type)

Product Details

FT-301Series automatic powder resistivity testing system details introduction

FT-301 Series powder

resistivity test system

Function Overview Overview:

1. Integrated structural design

2. Powder specific resistance, resistivity, and conductivity analysis are integrated

3. PC software process data analysis

4. The relationship between the variation spectra of powder pressure, resistance value, resistivity, and conductivity value

5. Four terminal method measurement

6. Automatic operation mode

Application Description:

When the powder is compressed until it reaches a steady state, the porosity of the powder is small, and the compacted density is close to the true density state. At this time, the tested powder conductivity is close to the theoretical value

1. Described the trend of changes in the electrical properties of the powder during the compression volume change process,

2. Describe the curve diagram of the rebound deformation or recovery process of the powder due to its inherent cohesive force during the pressure reduction process after compression;

Scope of application

of application：

Conductive powders that require analysis of electrical performance, such as lithium battery materials, graphene, graphite, carbon powder, coking, petrochemical, powder metallurgy and other production and processing enterprise departments;

Higher education institutions, research departments, quality inspection agencies, quality management departments, research and development departments, etc.	4、 Parameter data	Specification and model			FT-301A
FT-301B	FT-301C	1. Resistance			10-8～2×105Ω
10-7～2×107Ω	10-6～2×106Ω	2. Range of resistivity			10-8～2×105Ω-cm
10-7～2×107Ω-cm	10-6～2×106Ω-cm	3. Conductivity			5 ×10-5～108s/cm
5×10-7～107s/cm	5×10-6～106s/cm	4. Test current range
0-10A， 100uA	1μA，10μA，100µA，1mA，10mA，1000mA 5. Measure the voltage range	0-2v; Resolution 0.1Uv
Accuracy 0.1%	Voltage range: 2mV resolution 20mV 200mV 2V: 0.1uV measurement accuracy ± (0.1%)			6. Current accuracy
±0.1%	±0.2% 7. Resistance accuracy		≤ 0.3% standard resistance Resolution 0.01 μ Ω
≤ 0.3% standard resistance	Resolution 0.1 μ Ω
8. PC software interface	Resistance value, resistivity, conductivity value, temperature, pressure value, automatic unit conversion, cross-section, height, curve graph, compaction density, report generation, etc 9. Height range and accuracy
Automatic real-time height measurement up to the thousandth range: 0.001-10.001mm, measurement resolution 0.001mm,	Measurable compression to 0.1mm thickness sample
10. Temperature and humidity range	Normal temperature -50 degrees; Humidity: 20% -98%
11. Constant pressure time	0-99.9S
12. Standard parts as standard	a. One standard calibration resistor; b. 1 standard height calibration piece
1. Testing methoda. Four point probe method b. Automatic measurement C. PC software running interface	14. Pressure range
choose and buya.200kg； b.300kg； c.500kg； d.1000kg 15. Powder mold	Optional If not available, the standard mold has an inner diameter of 10mm The mold can be selected with one of the following specifications:; a. Mold inner diameter 10mm; b. Mold inner diameter 16-16.3 mm;
c. Mold inner diameter 30mm;	d. Customization of other specifications
16. Pressurization method	Automatic operation
17. Demoulding method	Automatic operation
18. Electrode Material	copper
19. Vacuum cleaning system	External vacuum cleaner processor
20. Error	3%; repeatability error within 2% (Due to the influence of different material characteristics, errors may vary, except for human factors)
21. Working power supply	Input: AC 220V ± 10%, 50Hz Power consumption:<60W
22. Overall dimensions of the host	Approximately: H700mm * L650mm * D300mm
23. Net weight	About 45kg

24. Standard external selection

a. Computers and printers are configured according to customer requirements; b. 1 measurement certificate c. Moisture meter d. True density meter

Steps and processes

1. Run zeroing

2. Weigh the sample

3. Secure the electrode knob

4. Set software testing parameters run

5. Test data graph and process data generation report

6. Sample demolding

7. Test completed

Advantages description:

1. PC software analysis

2. Repetitive error of 2%

3. Collect changes in powder compression displacement to the thousandth percentile

4. Comes with calibration function

5. Measure the resistance to 0.01 μ Ω

6. Vacuum cleaning system

7. Configure standard calibration components

8. Equipped with dust-proof and anti-corrosion protective covers

Whole machine schematic diagram

Partial customer cases:

Nankai University

Xihua University

Institute of Process Engineering, Chinese Academy of Sciences

hebei university of engineering

Wenzhou University

Tianjin University

Gaoque Co., Ltd

Fujian Xinsen Carbon Industry Co., Ltd

Dongguan University of Technology

Beijing United Coating Technology Co., Ltd

Duofuduo New Energy Technology Co., Ltd

Tianyuan Xiwang (Shenzhen) New Energy Materials Technology Co., Ltd

Beijing Institute of Technology

yangzhou university

Guangxi University

Shenzhen National Innovation Energy Research Institute

Lianyungang Zhengdao New Energy Co., Ltd

Wuhan University School of Chemistry

Shanghai Jiaotong University

University of Electronic Science and technology

Shandong Lianke New Materials Co., Ltd

Heilongjiang Tianlin Technology Co., Ltd

Xi'an Jiaotong University

Changzhou 2D Carbon Technology Co., Ltd

Guangzhou Institute of Energy, Chinese Academy of Sciences

Wuhan Youzhuo Technology Co., Ltd

Shenzhen Sno Industrial Development Co., Ltd

Extreme Resources Technology Co., Ltd

Hubei Zechuan Technology Co., Ltd

Guizhou Anda Technology Energy Co., Ltd

Software operation interface diagram

1.Sample Test ReportService Items

2.Warranty:

12 months, long-term maintenance

3.Training: Operation Training:

Telephone teaching; USB teaching files; Remote visual communication; On site teaching; Instruction manual and teaching documents

4.Maintenance and upkeep:

Provide knowledge maintenance and maintenance documents, labels, forms, and maintenance reminders

5.Verification file:

3Q verification documents, measurement certificates

Extended Services:

Extended warranty service, sample testing service, extended service, instrument rental service

Common supporting solutions for powder industry machines:

one

Common instrument solutions in the powder industry:

Moisture meter, loose density meter, angle of repose tester, powder flowability tester

Screening particle size analyzer, compaction density meter, powder conductivity tester, bulk density meter

Comprehensive analysis solution for powder:

FT-3400 Powder Flow Behavior Analyzer (Static Mechanics, Shear Method)

FT-7100 Powder Flow Tester (Dynamic Mechanics, Drum Method or Rotary Cylinder Method)

FT-3900 Powder Yield Strength Analyzer (Uniaxial Compression Method)

FT-3500 Powder Compression Strength Tester (compressibility, compression equation)FT-2000 Particle and Powder Characterization Analyzer Series (Traditional Method)

FT-301 series powder resistivity testing system (electrical performance)Ruike shares:ROOKORuike Instrument

-----Focusing on powders

New Material Measurement and Analysis Instrument Solution---

Resolve powder characterization:

Flow and non flow analysis; Granularity; water content; Volume analysis; Conductivity and electrostatic charge analysis
----