-
Phone
13806673976
-
Address
Zhejiang Ningbo Jiangbei District No. 58, Lane 225, Kaiyuan Road, Hongtang Industrial Zone C
Product Categories
- Powder electrostatic charge, electrical properties
- Insulation material volume and surface resistivity tester
- Powder flowability comprehensive characteristic analyzer
- High temperature resistance/resistivity/conductivity tester for materials
- Particle strength screening particle size moisture analyzer
- Voltage drop/circuit resistance/load tester
- Powder compaction/stacking/compaction density tester
- Powder flowability tester - single function type
- Four probe/block resistance/resistivity tester
- Our services
- Powder resistance/resistivity/conductivity tester
Ningbo Ruike Weiye Instrument Co., Ltd
FT-8400 series automatic insulation powder resistivity tester (multifunctional type)
NegotiableUpdate on 05/26
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
FT-8400 series automatic insulation powder resistivity tester (multifunctional type)
Product Details
FT-8400Series automatic insulation powder resistivity tester details introduction
FT-8400 Series of intelligent insulation powder
resistivity testerFunction Overview:
1. Functional overview
2. The measuring range of range resistance can measure up to 10 ^ 16 Ω
3. Adopting integrated circuit modules; Integrated structural design
4. USB， 232 communication interface, DC constant voltage source,
5. Using PC software operation,
6. Analysis of data curves and graphs during automatic testing process
Report generation, storage, and printing
working principle:
The powder sample placed in the solid mold is subjected to pressure changes, resulting in volume compression. During the compression process, the changes in resistance and resistivity of the powder sample during the volume change process are measured in real time, until it is compacted to a stable volume state; The porosity is very small and close to zero
Resolve the human error caused by the inability to shape powder samples into tablets or by measuring them after compression
Application Description:
When the powder is compressed until it reaches a steady state, the porosity of the powder is small, and the compacted density is close to the true density state. At this time, the tested powder conductivity is close to the theoretical value
1. Described the trend of changes in electrical properties of insulating powder during the compression volume change process
2. Describe the curve diagram of the rebound deformation or recovery process of the compressed insulating powder due to its inherent cohesive force during the pressure reduction processScope of application:
Scope of
application
1. Application: Measurement and analysis of insulation powder particles with similar properties, such as plastic powder, coatings, resin powder, chemical powder, rubber powder, etc
2. Used for measuring and analyzing static electricity generated by changes in cohesive force during compression of insulation powder
3. Used for enterprise quality inspection; R&D department, colleges and universities; Research institutes; And quality inspection agencies
Technical Parameters Parameter Data Technical
|
Parameters |
III |
Models and indicators |
|
indicators： |
104Specification and model13FT-8400A |
FT-8400B |
|
1. Resistance range |
104Ω～1×1013Ω |
104Ω ～1×1016Ω |
|
2. Range of resistivity |
Ω～1×10 |
|
|
Ω-cm |
104 ～ 2.0×1016 Ω-m |
|
|
3. Test voltage
|
0-1000V 4. Resistance accuracy |
|
|
＜1G ±1% ; ≥1G ±3%; ≥1T |
±10% ; ≥ 10T ± 20% (standard resistance) |
|
|
5. PC software interface |
Resistance, resistivity, unit switching, current, voltage, thickness |
|
|
Graph display, pressure setting, pressure, report export, waveform refresh, time setting, start, stop, runcompacted density6. Testing method |
The testing powder adopts the two electrode method, (solid materials can be externally connected with a three ring electrode method) |
|
|
7. Mold |
Standard mold inner diameter 10mm; other specifications can be customized |
|
|
8. Pressure range
|
choose and buy |
|
|
: |
a.200kg； b.300kg； c.500kg； d.1000kg |
|
|
9. Mold cavity stroke: |
0-20mm |
|
|
10. Sample height |
Automatic real-time sample height to thousandth range: 0.001-10000mm, measurement resolution 0.001mm, can measure sample compression thickness of 0.1mm |
|
|
11. Constant pressure time: |
0-99.9s |
|
|
12. Temperature and humidity range |
Normal temperature -50 degrees; Humidity: 20% -98%/ |
|
|
13. Standard parts as standard |
a. One standard calibration resistor; b. 1 standard height calibration piece |
|
|
14. Testing method |
a. Automatic measurement b. PC software interface operation |
|
|
15. Pressurization method |
Automatic operation |
|
|
16. Demoulding method |
Automatic operation |
|
|
17. Electrode Material |
Copper electrode |
|
|
18. Vacuum cleaning system |
External vacuum cleaner processor 19. Error: |
|
1% -15% is subject to different material characteristics and range errors
20. Working power supply:
Input: AC 220V ± 10%, 50Hz: 60W
21. Standard external selection
a. Computers and printers are configured according to customer requirements; b. 1 copy of measurement certificate
c. Moisture meter d. True density meter
Whole machine schematic diagram
Steps and processes
1. Run zeroing
2. Weigh the sample
3. Secure the electrode knob
4. Set software testing parameters run
5. Test data graph and process data generation report
6. Sample demolding
7. Test completed
Advantages description:
1. PC software analysis
2. Collect changes in powder compression displacement to the thousandth percentile
3. Comes with calibration function
4. Measurable range up to 1016
5. Vacuum cleaning system
6. Configure standard calibration components
7. Equipped with dust-proof and anti-corrosion protective covers
8. Easy to operate
9. Stability
Partial customer cases:
Institute of Process Engineering, Chinese Academy of Sciences
Guangzhou Jian You Kang Medical Equipment Co., Ltd
Nanning Yingxin Biotechnology Co., Ltd
Beijing Kenrui Technology Co., Ltd
Shandong Lianke New Materials Co., Ltd
Heilongjiang Tianlin Technology Co., Ltd
Xi'an Jiaotong University
Wuhan Youzhuo Technology Co., Ltd
Shenzhen Sno Industrial Development Co., Ltd
Extreme Resources Technology Co., Ltd
Hubei Zechuan Technology Co., Ltd
Hangzhou Keyang New Material Technology Co., Ltd
Xi'an Topu Electric Co., Ltd
Beijing Jiecheng Yongxing Technology Co., Ltd
Harbin Chuanshi Technology Development Co., Ltd
Jiangsu Qingyuan New Materials Technology Co., Ltd
Hunan University
Kangbai Medical Equipment Huizhou Co., Ltd
Jiangsu Motai New Materials Co., Ltd
Huizhou Xinglv Technology Co., Ltd
Shanghai Institute of Technology
Dalian Taidou Building Materials Co., Ltd
Jiangxi Jinshi High tech Development Co., Ltd
Shenzhen Yuewang Energy saving Technology Co., Ltd
Yangzhou Deruifu Technology Co., Ltd
Tongji University
1.Nankai UniversityXihua University
2.Institute of Process Engineering, Chinese Academy of Sciences
hebei university of engineering
3.Software operation interface diagram
Service Items
4.Warranty:
12 months, long-term maintenance
5.Training: Operation Training:
Telephone teaching; USB teaching files; Remote visual communication; On site teaching; Instruction manual and teaching documents
Maintenance and upkeep:
Provide knowledge maintenance and maintenance documents, labels, forms, and maintenance reminders
Verification file:
3Q verification documents, measurement certificates
Extended Services:
Extended warranty service, sample testing service, extended service, instrument rental service
Common supporting solutions for powder industry machines:
one
Common instrument solutions in the powder industry:
Moisture meter, loose density meter, angle of repose tester, powder flowability tester
FT-301 series powder resistivity testing system (electrical performance)Ruike shares:
ROOKO
Ruike brand-----
Focusing on powders
&
New Material Measurement and Analysis Instrument Solution
Similar Product Recommend
