Far infrared hot air circulation drying oven

NegotiableUpdate on 05/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: Far infrared hot air circulation drying oven, the hot air circulation drying oven is composed of angle steel, stainless steel plate, and cold steel plate. The insulation layer is filled with high-density aluminum silicate cotton, which ensures the insulation of the drying oven and the safety of the user. The installation position of the heater can be at the bottom, top, or both sides. Use digital intelligent instruments to control temperature. There are two types of air duct designs for hot air circulation drying oven: horizontal air supply and vertical air supply!

Product Details

　　Far infrared hot air circulation drying ovensummary:

The equipment uses steam or electric heating as the heat source, and under the forced circulation of the fan, the air layer flows through the drying tray to transfer heat with the material and take away the temperature in the material. According to the different requirements of the material and the different states of the drying process, the ratio of air discharge to circulation can be adjusted to achieve the dual improvement of drying speed and heat utilization efficiency It is a choice for GMP certification.

Manufacturer Introduction

Shengguan Enterprise registered Shengguan Pharmaceutical Machinery Equipment (Suzhou) Co., Ltd. on December 23, 2013. The registered capital is 30 million yuan. The company acquired 20 acres of land. Located in Suzhou Taicang High tech Industrial Park. We are a production-oriented enterprise dedicated to the research and development of pharmaceutical machinery and packaging equipment. Member unit of China Pharmaceutical Equipment Industry Association. The company has hired experienced experts and professors from Shanghai Light Industry Design Institute for a long time to design and guide the products, and has introduced * technology to continuously improve the products.

Technical parameters:

1. Heating source: dual-purpose steam, electricity, far-infrared, and electric steam.

2. Usage temperature: Steam heating: 50-140 ℃, with a maximum of 150 ℃. Electric and far-infrared heating temperatures range from 50-350 ℃.

3. Equipped with self-control system and computer control system.

4. The commonly used steam pressure is 0.02-0.8Mpa (0.2-8kgf/cm2).

5. Equipped with electric heating, calculate 15kw according to Type I, practical 5-8kw/h.

6. Special requirements shall be indicated at the time of ordering.

7. If the operating temperature is greater than 140 ℃ or less than 60 ℃, it should be specified when ordering.

8. Our factory produces drying cars with uniformly sized drying plates that can be interchanged.

9. Drying tray size: 460 × 640 × 45

　　Far infrared hot air circulation drying ovenGenerally, ovens with heating tubes and circulating fans can be called hot air circulating ovens, because regardless of the structure of the oven, whether the wind direction is horizontal or vertical, it is ultimately the hot air circulating inside. Therefore, they can be commonly referred to as hot air circulating ovens, such as electric blast ovens, double door high-temperature sterilization ovens, etc. However, in the general industry, the term "hot air circulation oven" mostly refers to the oven shown in the above figure. Other ovens have evolved from the oven shown in the above figure. For example, with the requirement for high-temperature sterilization, the fan has been changed to a standardized air-cooled ring fan, and the front and rear doors have been opened. The air duct has also been changed, becoming a double door high-temperature sterilization oven. The hot air circulation shown in the above figure is divided into five standard models. They are single door bicycles, two door two car bicycles, two door four car bicycles, three door six car bicycles, and four door eight car bicycles.

The company specializes in the production of liquid filling production lines for injections, oral liquids, syrups, eye drops, sprays, vaccines, etc., powder sub packaging production lines, several bottle packaging production lines and various stand-alone equipment. The equipment is widely used in industries such as pharmaceuticals, food, and daily chemical products!

Our company's products are distributed throughout the country and exported to various parts of the world such as the Americas, Europe, Asia, and the Middle East. We provide tracking services for our products, with free maintenance during the warranty period and lifetime repairs. After sales service enjoys a high reputation among users. The company has passed ISO9001 quality system certification, and some products have passed EU CE certification.