-
E-mail
xiewenqing2000@126.com
-
Phone
13472521719
-
Address
Room 803, No. 1198 Defu Road, Jiading District, Shanghai
Product Categories
Shanghai Dingzhen Instrument Equipment Co., Ltd
German Mahr Mal 840FS with watch card gauge
NegotiableUpdate on 01/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Mahr Mahr 840FS with meter card gauge $r $nMaraMeter from Germany is a series of instruments for high-precision inner and outer diameter measurement of single and batch parts. These measuring instruments with gauges have stable measuring forces, precise transmission rod systems, and parallel measuring surfaces, so they can provide accurate results. Marameter also provides mature solutions for special measurement tasks.
Product Details
Feel troubleIt is a series of instruments for high-precision inner and outer diameter measurement of single and batch parts. These measuring instruments with gauges have stable measurement force, precise transmission rod system, and parallel measurement surfaces, so they can providepreciseresultFeel troubleWe also provide mature solutions for special measurement tasks.German Mahr Mal 840FS with watch card gauge German Mahr Mal 840FS with watch card gauge
Feel trouble|Watch card gauge840 F / 840 FC
Marameter 840 F / 840 FCThe gauge card can provide high-precision and reliable measurement results for cylindrical workpieces with extremely small tolerance zones
Marameter 840 F
feature
•Durable cast steel frame with thermal insulation
•The measuring axis is installed on a long guide rail, and the joystick controls the retraction
•The measuring axis and measuring surface are made of hardened stainless steel; Measuring surface with hard alloy
•Adjustable centering block for center positioning
•The measuring axis is very easy to fine tune
•Built in spring achieves constant measurement force, avoiding the influence of human factors
•The parts have no friction with the hard alloy measuring surface Positionable and wear-resistant
•Packaging content: Flat measuring head 903(Steel), instruction manual, wooden box, excluding indicator table
Application:
•Used for cylindrical parts such as handles, bolts, and shafts
•Used for thickness and length measurement
•Widely applicable and extremely flexible
–Each instrument has a large measurement range
–Can be quickly and conveniently installed and measured in any size
Order Number |
model |
measurement range mm |
Scope of application Inch |
Parallelism deviation um |
Plane laying deviation um |
repetitiveness um |
act according to one's ability N |
Frame size |
4450000 |
840F |
0-25 |
0-1 |
2 |
1 |
0.2 |
7.5 |
1 |
4450001 |
840F |
25-60 |
1-2.36 |
2 |
2 |
0.2 |
7.5 |
2 |
4450002 |
840F |
50-100 |
2-4 |
2.5 |
2 |
0.2 |
7.5 |
3 |
4450003 |
840F |
100-150 |
4-6 |
2.5 |
2 |
0.2 |
9 |
4 |
4450004 |
840F |
150-200 |
6-8 |
2.5 |
2 |
0.2 |
9 |
5 |
attachment
Order Number |
description |
model |
4333000 |
Millimess 5 µm，± 130 µm |
1004 |
4334000 |
Millimess 1 µm，± 50 µm |
1003 |
4334001 |
Millimess 2 µm，± 130 µm |
1003XL |
4335000 |
Millimess 0.5 µm，± 25 µm |
1002 |
4337620 |
Digital display indicator,0.0005 mm，12.5 mm |
1086R |
4337624 |
Digital display indicator,0.0005 mm，12.5 mm |
1086Ri |
4450020 |
Base, static application |
840 Ff |
4450050 |
Clamping sleeve, frame size 1 |
840 Fk / 1 |
4450051 |
Clamping sleeve, frame size2 |
840 Fk /2 |
4450052 |
Clamping sleeve, frame size3 |
840 Fk / 3 |
4450053 |
Clamping sleeve, frame size4+5 |
840 Fk / 4 |
Manmeter 840 FC
feature
•Durable cast steel frame with thermal insulation
•The measuring axis is installed on a long guide rail, and the joystick controls the retraction
•The measuring axis and measuring surface axis are both made of hardened stainless steel, with ceramic measuring surfaces
•Adjustable centering block for center positioning
•The measuring axis is very easy to fine tune
•Built in spring for constant measurement force, avoiding Human factors influence
•The parts can be positioned without friction with the hard alloy measuring surface, and the wear-resistant surface achieves high wear resistance Combining Ceramic Measurement Surface
•Packaging content: Flat measuring head 903(Steel),
Instruction manual, wooden box, excluding indicator table
Application:
•Used for cylindrical parts such as handles, bolts, and shafts
•Used for thickness and length measurement
•Widely applicable and extremely flexible
–Each instrument has a large measurement range
–Can be quickly and conveniently installed and measured in any size
Order Number |
model |
measurement range mm |
Scope of application Inch |
Parallelism deviation um |
Plane laying deviation um |
repetitiveness um |
act according to one's ability N |
Frame size |
4450100 |
840FC |
0-25 |
0-1 |
2 |
1 |
0.2 |
7.5 |
1 |
4450101 |
840FC |
25-60 |
1-2.36 |
2 |
2 |
0.2 |
7.5 |
2 |
attachment
Order Number |
description |
model |
4333000 |
Millimess 5 µm，± 130 µm |
1004 |
4334000 |
Millimess 1 µm，± 50 µm |
1003 |
4334001 |
Millimess 2 µm，± 130 µm |
1003XL |
4335000 |
Millimess 0.5 µm，± 25 µm |
1002 |
4337620 |
Digital display indicator,0.0005 mm，12.5 mm |
1086R |
4337624 |
Digital display indicator,0.0005 mm，12.5 mm |
1086Ri |
4450020 |
Base, static application |
840 Ff |
4450050 |
Clamping sleeve, frame size 1 |
840 Fk / 1 |
4450051 |
Clamping sleeve, frame size2 |
840 Fk /2 |
4450052 |
Clamping sleeve, frame size3 |
840 Fk / 3 |
4450053 |
Clamping sleeve, frame size4+5 |
840 Fk / 4 |
Marameter 840 FHsnap gauge
feature
•Durable cast steel frame with thermal insulation
•The measuring axis is installed on a long guide rail, and the joystick controls the retraction
•The measuring shaft has a precision taper hole for installing a replaceable anvil (compatible)40 He）
•The measuring axis is very easy to fine tune
•Built in spring achieves constant measurement force, avoiding the influence of human factors
•The parts can be positioned without friction with the hard alloy measuring surface, and have wear resistance
•Packaging content: Flat measuring head 903(Steel), wrenchDIN 902 - 3.5Wooden box, excluding indicator table
Application:
•Used for cylindrical parts such as handles, bolts, and shafts
•General application
•Using a wide range of replaceable anvils can solve various measurement problems
Order Number |
model |
measurement range mm |
Scope of application Inch |
Parallelism deviation um |
Plane laying deviation um |
act according to one's ability N |
Frame size |
4451000 |
840FH |
0-30 |
0-1.18 |
2 |
1 |
7.5 |
1 |
4451005 |
840FH |
30-80 |
1.18-3 |
2.5 |
1 |
7.5 |
3 |
Order Number |
description |
model |
4333000 |
Millimess 5 µm，± 130 µm |
1004 |
4334000 |
Millimess 1 µm，± 50 µm |
1003 |
4334001 |
Millimess 2 µm，± 130 µm |
1003XL |
4335000 |
Millimess 0.5 µm，± 25 µm |
1002 |
4337620 |
Digital display indicator,0.0005 mm，12.5 mm |
1086R |
4337624 |
Digital display indicator,0.0005 mm，12.5 mm |
1086Ri |
4880210 |
wrench840FH, used to release the probe |
|
4152036 |
Probe, flat, hard alloy version |
40 He 0H |
4152011 |
Probe, concave plane |
40 He 1 |
4152033 |
Measuring head, concave end face, hard alloy |
40 He 1H |
4152012 |
Probe, concave plane |
40 He 2 |
4152031 |
Measuring head, concave end face, hard alloy |
40 He 2H |
4152013 |
Probe, disc-shaped measuring surface |
40 He 3 |
4152014 |
probe，Disk type anvil beltVShaped groove |
40 He 4 |
4152015 |
Measuring head, blade measuring head model, anvil |
40 He 5 |
4152016 |
Measuring head, offset blade measuring head |
40 He6 |
4152017 |
Measuring head, concave blade measuring head |
40 He7 |
4152018 |
Probe, concave plane, with strap onVShaped groove |
40 He8 |
4152019 |
Probe, concave plane, sliding on bracket |
40 He9 |
4152020 |
Probe with pores |
40 He10 |
4152021 |
Probe with dots |
40 He11 |
4450052 |
Clamping sleeve, frame size 3 |
840 Fk/3 |
Marameter 840 FG
feature
•Durable cast steel frame with thermal insulation
•The measuring axis is installed on a long guide rail, and the joystick controls the retraction
•There is one measuring axis and one measuring axisM 2.5Connecting threads allows for the use of interchangeable probes on indicator gauges, comparison instruments, and dial gauges
•The measuring axis is very easy to fine tune
•Built in spring achieves constant measurement force, avoiding the influence of human factors
•The parts can be positioned without friction with the hard alloy measuring surface, and have wear resistance
•Packaging content: Flat measuring head 903(Steel), wooden box, excluding indicator table
Application:
•Used for cylindrical parts such as handles, bolts, and shafts
•General application
•Using a wide range of replaceable anvils can solve various measurement problems
Order Number |
model |
measurement range mm |
Scope of application Inch |
Parallelism deviation um |
Plane laying deviation um |
act according to one's ability N |
Frame size |
4454000 |
840FG |
0-50 |
0-2 |
2 |
1 |
7.5 |
2 |
4454005 |
840FG |
40-90 |
1.57-3.57 |
2.5 |
1 |
7.5 |
3 |
Order Number |
description |
model |
4333000 |
Millimess 5 µm，± 130 µm |
1004 |
4334000 |
Millimess 1 µm，± 50 µm |
1003 |
4334001 |
Millimess 2 µm，± 130 µm |
1003XL |
4335000 |
Millimess 0.5 µm，± 25 µm |
1002 |
4337620 |
Digital display indicator,0.0005 mm，12.5 mm |
1086R |
4337624 |
Digital display indicator,0.0005 mm，12.5 mm |
1086Ri |
4450051 |
Clamping sleeve, frame size 2 |
840 Fk/2 |
4450020 |
Base, static application |
840 Ff |
4360002 |
Standard probe, made of hard alloy,r=1.5 mm |
901 H |
4360041 |
Standard probe, made of hard alloy,1=10mm，r=6mm |
902H |
4360043 |
Arc shaped probe, made of hard alloy,l=15mm，r=6mm |
902H |
4360044 |
Arc shaped probe, made of hard alloy,1=20mm，r=6mm |
902H |
4360101 |
Flat probe, hard alloy,l=6mm |
903H |
4360103 |
Flat probe, hard alloy,|=10 mm |
903 H |
4360105 |
Flat probe, hard alloy,l=15 mm |
903 H |
4360106 |
Flat probe, hard alloy,l=20mm |
903 H |
4360131 |
Cone shaped probe, made of hard alloy,r=0.3mm |
904 H |
4360150 |
Spherical probe, made of hard alloy,1=85mm，d=1.0mm |
906 H |
4360151 |
Spherical probe, made of hard alloy,l=8.5mm，d=1.25mm |
906 H |
4360152 |
Spherical probe, made of hard alloy,l=85mm，d=1.5mm |
906 H |
4360153 |
Spherical probe, made of hard alloy,1=85mm，d=1.75mm |
906 H |
4360154 |
Spherical probe, made of hard alloy,1=85mm，d=2.0mm |
906 H |
4360155 |
Spherical probe, made of hard alloy,l=8.5mm，d=2.5mm |
906 H |
4360156 |
Spherical probe, made of hard alloy,l=8.5mm，d=3.0mm |
906 H |
4360157 |
Spherical probe, made of hard alloy,1=8.5mm，d=3.5mm |
906 H |
4360158 |
Spherical probe, made of hard alloy,1=8.5mm，d=4.0mm |
906 H |
4360159 |
Spherical probe, made of hard alloy,1=8.5mm，d=4.5mm |
906 H |
4360160 |
Spherical probe, made of hard alloy,1=8.5mm，d=5.0mm |
906 H |
4360161 |
Spherical probe, made of hard alloy,l=9mm，d=5.5mm |
906 H |
4360162 |
Spherical probe, made of hard alloy,l=9mm，d=6mm |
906 H |
4360163 |
Spherical probe, made of hard alloy,1=9mm，d=6.35 mm |
906 H |
4360164 |
Spherical probe, made of hard alloy,l=10 mm，d=6.5mm |
906 H |
4360165 |
Spherical probe, made of hard alloy,l=10mm，d=7mm |
906 H |
4360166 |
Spherical probe, made of hard alloy,l=11mm，d=7.5mm |
906 H |
4360167 |
Spherical probe, made of hard alloy,l=11mm，d=8.0mm |
906 H |
4360168 |
Spherical probe, made of hard alloy,l=12mm，d=8.5mm |
906 H |
4360169 |
Spherical probe, made of hard alloy,l=12mm，d=9.0mm |
906 H |
4360170 |
Spherical probe, made of hard alloy,1=13mm，d=10.0mm |
906 H |
4360200 |
Large flat measuring head, steel color, measuring surfaceø11.3mm |
907 |
4360201 |
Large flat measuring head, hard alloy, measuring surfaceø7mm |
907H |
4360220 |
Large flat measuring head, made of steel, steel color, measuring surfaceø12mm |
908 |
4360211 |
Large flat measuring head, made of steel, hard alloy, measuring surfaceø12mm |
908H |
4360240 |
Needle probe, made of hard alloy,1=2mmMeasure the surfaceø1mm |
911 H1 |
4450052 |
Clamping sleeve, frame size 3 |
840 Fk/3 |
Marameter 840 FM
feature
•Durable cast steel frame with thermal insulation
•The measuring axis is installed on a long guide rail, and the control lever Control indentation
•The measuring axis and measuring surface are made of hardened stainless steel; Measuring clamp with extended hard alloy
•The measuring axis is very easy to fine tune
•Built in spring achieves constant measurement force, avoiding the influence of human factors
•Parts can be positioned without friction with the hard alloy measuring surface, with wear resistancePackage contents:Flat probe 903(Steel), Instruction manual, wooden box, excluding indicator table
Application:
•Used to detect the diameter of small wheel hubs, adjusters, and shaft shoulders on the shaft
•Can be used to detect tooth spanWk, as well as the tooth thickness of spur and helical gears
•Widely used and extremely flexible, each instrument has a long measurement range with adjustable range
•General application
Order Number |
4452000 |
4452001 |
4452002 |
4452003 |
|
model |
840FM |
||||
Scope of application |
mm |
0-40 |
40-80 |
80-130 |
130-180 |
Scope of application |
Inch |
0-1.57 |
1.57-3 |
3-5 |
5-7 |
From the modulemThe length of the starting common law line |
0.5 |
1 |
|||
Measuring surface dimensions |
12x12mm |
15x17mm |
|||
measurement range |
mm |
2 |
2.5 |
||
Parallelism deviation |
um |
2 |
3 |
||
Flatness deviation |
um |
0.5 |
|||
repetitiveness |
um |
1 |
|||
Measurement force |
N |
7.5 |
9 |
||
Frame size |
2 |
3 |
4 |
5 |
|
attachment
Order Number |
description |
model |
4333000 |
Millimess 5 µm，± 130 µm |
1004 |
4334000 |
Millimess 1 µm，± 50 µm |
1003 |
4334001 |
Millimess 2 µm，± 130 µm |
1003XL |
4335000 |
Millimess 0.5 µm，± 25 µm |
1002 |
4337620 |
Digital display indicator,0.0005 mm，12.5 mm |
1086R |
4337624 |
Digital display indicator,0.0005 mm，12.5 mm |
1086Ri |
4450020 |
Base, static application |
840 Ff |
4450050 |
Clamping sleeve, frame size 1 |
840 Fk / 1 |
4450051 |
Clamping sleeve, frame size2 |
840 Fk /2 |
4450052 |
Clamping sleeve, frame size3 |
840 Fk / 3 |
4450053 |
Clamping sleeve, frame size4+5 |
840 Fk / 4 |
Marameter 840 FS
feature
•Durable cast steel frame with thermal insulation
•Both shafts are made of hardened stainless steel and installed in long guide rails
•Hard alloy measurement with slight chamfer on the front and side for easy positioning
•The measurement position protrudes forward, making it easy to measure narrow areas and the shoulder of the shaft
•Adjustable centering block for center positioning
•Directly transmit the variation of the measuring head to the indicator table; Ensure that the weight of the caliper is directly applied to the measuring axis
•Directly display and evaluate measurement results
•Built in spring achieves constant measurement force, avoiding the influence of human factors
•Package contents:Wooden box, hexagonal wrench, excluding indicator gauge
Application:
•Used for all types of cylindrical workpieces, whether directly on the machine tool
Still in production control
•Widely applicable and extremely flexible
–Each instrument has a large measurement range
–Can be quickly and conveniently installed and measured in any size
Order Number |
weight Kg |
model |
Scope of application mm |
measurement range mm |
Parallelism deviation Um |
Flatness deviation Um |
repetitiveness Um |
Measurement force N |
4455000 |
0.6 |
840FS |
10-30 |
0.7 |
3 |
0.5 |
1 |
13.5 |
4455001 |
0.9 |
840FS |
30-60 |
0.7 |
3 |
0.5 |
1 |
13.5 |
4455002 |
1.3 |
840FS |
60-100 |
0.7 |
3 |
0.5 |
1 |
13.5 |
4455003 |
1.7 |
840FS |
100-150 |
0.7 |
3 |
0.5 |
1 |
15 |
4455004 |
2.0 |
840FS |
150-200 |
0.7 |
3 |
0.5 |
1 |
15 |
4455005 |
2.2 |
840FS |
200-250 |
0.7 |
3 |
0.5 |
1 |
15 |
4455006 |
2.5 |
840FS |
250-300 |
0.7 |
3 |
0.5 |
1 |
15 |
4455007 |
3.3 |
840FS |
300-350 |
0.7 |
4 |
0.5 |
1 |
15 |
4455008 |
3.3 |
840FS |
350-400 |
0.7 |
4 |
0.5 |
1 |
15 |
4455009 |
4.3 |
840FS |
400-450 |
0.7 |
4 |
0.5 |
1 |
15 |
4455010 |
4.7 |
840FS |
450-500 |
0.7 |
4 |
0.5 |
1 |
15 |
Order Number |
description |
model |
4333000 |
Millimess 5 µm，± 130 µm |
1004 |
4334000 |
Millimess 1 µm，± 50 µm |
1003 |
4334001 |
Millimess 2 µm，± 130 µm |
1003XL |
4335000 |
Millimess 0.5 µm，± 25 µm |
1002 |
4337620 |
Digital display indicator,0.0005 mm，12.5 mm |
1086R |
4337624 |
Digital display indicator,0.0005 mm，12.5 mm |
1086Ri |
Marameter 840 E
feature
•According to the Abbe principle, the axis motion is directly transmitted to the inductance measurement system, making it extremely accurate
•Widely applicable and extremely flexible
–Each instrument has a large measurement range
–Can be quickly and conveniently installed and measured any size
•Built in spring achieves constant measurement force, avoiding the influence of human factors
•The parts can be positioned without friction with the hard alloy measuring surface, and have wear resistance
•Package contents:Wooden box, excluding indicator table
Application:
•Ultra high precision measurement of precision components (diameter, thickness, and length measurement)
Order Number |
model |
Scope of application mm |
resolution Um |
Measure the surface mm |
measurement stroke um |
Parallelism deviationum |
repetitiveness Um |
Measurement force N |
Frame size |
4453000 |
840E |
0-25 |
0.01 |
7.5 |
0.5 |
0.3 |
0.1 |
4.5 |
1 |
attachment
Order Number |
description |
model |
5312012 |
Compact amplifier |
C1200M |
5312025 |
Compact amplifier |
C1202 |
5331120 |
Inductance measurement module |
N1702M |
5331125 |
Inductance measurement module |
N1702M-HR |
4450020 |
Base, static application |
840Ff |
Manmeter 852
feature
•Durable cast steel frame with thermal insulation
•The measuring surface is installed on a long guide rail and the control lever is used Control indentation
•The measuring shaft and probe are both made of hardened stainless steel, and the mounting hole is used to insert a replaceable anvil
•Adjustable centering block for automatic alignment
•The activity measuring rod can be easily fine tuned
•Built in spring for constant measurement force, avoiding user interference
•Non contact positioning combined with hard alloy measuring surface to achieve high wear resistance performance
•Packaging content: Hard alloy flat measuring head 903 (Steel), wooden box, excluding indicator table
Application:
•Measure various external threads and tap pitches, bottom diameters, and outer diameters
•Universal and extremely flexible; Each instrument has a large measurement range
Order Number |
4510000 |
4510001 |
4510002 |
4510003 |
|
model |
852 |
||||
Scope of application |
mm |
0-45 |
45-85 |
85-140 |
140-190 |
measurement range |
mm |
2 |
2.5 |
||
Parallelism deviation |
um |
2 |
3 |
||
Flatness deviation |
um |
0.5 |
|||
repetitiveness |
um |
1 |
|||
Measurement force |
N |
7.5 |
9 |
||
Frame size |
2 |
3 |
4 |
5 |
|
attachment
Order Number |
description |
model |
4333000 |
Millimess 5 µm，± 130 µm |
1004 |
4334000 |
Millimess 1 µm，± 50 µm |
1003 |
4334001 |
Millimess 2 µm，± 130 µm |
1003XL |
4335000 |
Millimess 0.5 µm，± 25 µm |
1002 |
4337620 |
Digital display indicator,0.0005 mm，12.5 mm |
1086R |
4337624 |
Digital display indicator,0.0005 mm，12.5 mm |
1086Ri |
4450051 |
Clamping sleeve, frame size 2 |
840 Fk/2 |
4450020 |
Base, static application |
840 Ff |
4173210 |
Flat probe.Hardened steel,7.5 mm |
40 Za |
4511190 |
Flat probe.Hard alloy,7.5 mm |
40 Za |
4450052 |
Clamping sleeve, frame size 3 |
840 Fk/3 |
4450053 |
Clamping sleeve, frame size4+5 |
840 Fk/4 |
Manmeter 853
feature
•Durable cast steel frame with thermal insulation
•The measuring head is installed on a long guide rail and controlled by a joystick Reduce indentation
•Wing screws can be used to adjust the measuring axis through the worm and bracket, for installing replaceable bracket yokes
•The measuring axis and probe are both made of hardened stainless steel, and the mounting holes are used to insert replaceable probes
•The activity measuring rod can be easily fine tuned
•Built in spring for constant measurement force, avoiding user interference
•Non contact positioning achieves wear resistance performance
•Measurement of thread pitch diameter requires selection 1 aVType probe and 2 A circular arc blade measuring head
•Package contents:Hard alloy flat probe 903 (Steel), wooden box, excluding indicator table
Application:
•Combining replaceable probes to measure pitch, bottom diameter, and outer diameter
•Universal and extremely flexible; Each instrument has a large measurement range
Order Number |
4511000 |
4511001 |
|
model |
853 |
||
Scope of application |
mm |
1.2-35 |
35-75 |
measurement range |
mm |
8 |
|
repetitiveness |
um |
2 |
|
Measurement force |
N |
7.5 |
|
attachment
Order Number |
description |
model |
4334001 |
Millimess 2 um, ± 130 um |
1003 XL |
4333000 |
Millimess 5 um, ± 130 um |
1004 |
4332000 |
Millimess 0.01. + 0.25 mm |
1010 |
4337620 |
Digital display indicator,0.0005mm，12.5mm |
1086 R |
4337624 |
Digital display indicator,0.0005 mm，12.5mm |
1086 Ri |
4511024 |
Replaceable bracket 3a1.2-35 mmRange cone groove |
853 qk 3 |
4511025 |
Replaceable bracket3a35-75 mmRange cone groove |
853 qg 3 |
4511026 |
Replaceable bracket5a1.2-35 mmRange cone groove |
853 qk 5 |
4511027 |
Replaceable bracket5a35-75 mmRange cone groove |
853 qg 5 |
4511028 |
Replaceable bracket7a1.2-35 mmRange cone groove |
853 qk7 |
4511029 |
Replaceable bracket7a35-75mmRange cone groove |
853 qg 7 |
4511190 |
Flat probe, hardened steel,7.5mm |
40 Za |
4173210 |
Flat probe, hard alloy,7.5mm |
40 Za |
Similar Product Recommend