Hot air circulation drying oven

Hot air circulation drying ovensummary:
The equipment uses steam or electric heating as the heat source, and under the forced circulation of the fan, the air layer flows through the drying tray to transfer heat with the material and take away the temperature in the material. According to the different requirements of the material and the different states of the drying process, the ratio of air discharge to circulation can be adjusted to achieve the dual improvement of drying speed and heat utilization efficiency It is a choice for GMP certification.

Structure:

The hot air circulation drying oven is composed of angle steel, stainless steel plate, and cold steel plate. The insulation layer is filled with high-density aluminum silicate cotton, which ensures the insulation of the drying oven and the safety of the user. The installation position of the heater can be at the bottom, top, or both sides. Use digital intelligent instruments to control temperature. There are two types of air duct designs for hot air circulation drying oven: horizontal air supply and vertical air supply!

Manufacturer Introduction

Shengguan Enterprise registered Shengguan Pharmaceutical Machinery Equipment (Suzhou) Co., Ltd. on December 23, 2013. The registered capital is 30 million yuan. The company acquired 20 acres of land. Located in Suzhou Taicang High tech Industrial Park. We are a production-oriented enterprise dedicated to the research and development of pharmaceutical machinery and packaging equipment. Member unit of China Pharmaceutical Equipment Industry Association. The company has hired experienced experts and professors from Shanghai Light Industry Design Institute for a long time to design and guide the products, and has introduced * technology to continuously improve the products.
Hot air circulation drying ovenTechnical parameters:

1. Heating source: dual-purpose steam, electricity, far-infrared, and electric steam.
2. Usage temperature: Steam heating: 50-140 ℃, with a maximum of 150 ℃. Electric and far-infrared heating temperatures range from 50-350 ℃.
3. Equipped with self-control system and computer control system.
4. The commonly used steam pressure is 0.02-0.8Mpa (0.2-8kgf/cm2).
5. Equipped with electric heating, calculate 15kw according to Type I, practical 5-8kw/h.
6. Special requirements shall be indicated at the time of ordering.
7. If the operating temperature is greater than 140 ℃ or less than 60 ℃, it should be specified when ordering.
8. Our factory produces drying cars with uniformly sized drying plates that can be interchanged.
9. Drying tray size: 460 × 640 × 45