- Phone
-
Address
505-1 Shenzhen Integrated Circuit Design and Application Industrial Park, No. 1089 Chaguang Road, Nanshan District, Shenzhen
Product Categories
- Five in one measurement SOC/MCU series
- Three phase metering chip RN8302 series
- Portable verification device
- Electrical measuring instrument chip RN7XXX series
- Single phase metering chip RN8209 series
- IM single-phase AC measurement module series
- IM Single phase AC/DC Measurement Module Series
- IM three-phase AC measurement module series
Shenzhen Airuida Optoelectronics Co., Ltd
IM3332 Three phase AC power quality monitoring and measurement module
NegotiableUpdate on 07/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
IM3332IM3332 three-phase AC power quality monitoring and measurement module 1. Provides three-phase full wave voltage, current, power, power factor, electricity quantity and total electricity quantity, active power, reactive power, RMS or PQS apparent power and other electrical parameters. 2. Provide data on the 41st harmonic, 21st harmonic, flicker, real-time sampling waveform, etc. of three-phase voltage and current. 3. Provide interrupt signal output based on waveform data to detect sag, overvoltage, and overcurrent. 4. Provide A-type residual current detection and alarm function. 5. Provide 3-channel analog acquisition function, which can be connected to industrial standard temperature and humidity sensors externally. 6. It has 1 TTL and 1 485 communication interface, and the communication protocol adopts standard Modbus RTU and DLT645-2007 protocols. 7. It has alarm output and customizable output events. Such as overvoltage, overcurrent, undervoltage, undercurrent, phase sequence error, undervoltage, etc. 8. Three phase three wire and three-phase four wire hardware are compatible, and software can be configured according to requirements. Contact customer service to make an immediate purchase
Product Details
Product Overview
IM3332 three-phase power quality monitoring and metering module is a three-phase power metering product developed by Shenzhen Airuida Optoelectronics Co., Ltd. with completely independent intellectual property rights. The technical performance of this product fully complies with the relevant technical requirements of the Level 1 three-phase active energy meter in the IEC 62053-21 national standard. It can directly and accurately measure electricity related parameters such as voltage, current, power, power factor, electricity quantity, and total energy in a rated frequency of 50HZ or 60Hz three-phase AC power grid, as well as related data such as harmonics, interharmonics, flicker, loss of voltage, overvoltage, overcurrent, etc. for electricity quality analysis.
This product is equipped with 1 TTL communication interface, 1 485 communication interface, energy pulse output interface, and supports Modbus RTU/DLT645-2007 communication protocol. Convenient to connect with various AMR systems, it has the characteristics of good reliability, small size, light weight, beautiful appearance, and easy installation.
This product can be widely used in industries such as energy-saving renovation, power, communication, transportation, environmental protection, petrochemicals, and dynamic environmental monitoring, to monitor the power consumption and power quality of AC equipment.
Technical Parameter
Industry Applications
Three phase power quality monitoring, three-phase power consumption monitoring terminal
Many listed companies choose us3Dali You
-
major
National high-tech enterprise, with a research and development team deeply involved in the electrical measurement industry for over 20 years. 100% of the R&D personnel have a bachelor's degree or above, with 60% having a master's degree or above. We are the main supplier of electrical measurement solutions for the smart meter and charging pile industries, and the drafting unit for the "Comprehensive Energy Power Sensing Terminal" standard.
-
One-Stop
Exclusive domestic provision of 4 types of electrical measurement solutions
1. Electric energy metering chip
2. Electrical measurement module
3. Electrical measurement kit
4. Electrical measurement scheme
And provide customers with electrical measurement and calibration equipment and services.
-
Rich industry experience
The product is applied in more than 10 industries, including smart meters, car charging stations, bicycle charging stations, power exchange stations, power exchange cabinets, smart light poles, smart agriculture, smart buildings (smart buildings), smart parks, smart factories, dynamic environment FSUs, energy management, and smart transportation. It provides more than 100 electrical measurement and metering solutions, has more than 1000 customers, and has shipped over 1 million metering modules.
Similar Product Recommend
