Imported wide-angle belt 7M545PU belt

Imported wide-angle belt 7M545PU belt

Chifeng - a strong team. In the face of new situations, opportunities, and challenges, all employees of Chifeng Electromechanical will always follow the corporate horn of "no, only better" and adhere to the business philosophy of "honest management, authentic sales, and high-quality service"; Adhere to the principle of "quality *, customer first, continuous improvement, and excellence", and strive to satisfy all new and old customers.

Imported wide-angle belt 7M545PU belt

Characteristics:

The 60 ° angle of * and the structure of polyurethane material enable it to withstand greater loads compared to traditional V-belts when operating at high speeds in small spaces.

2. Polyurethane mixtures can resist wear, ozone, and most environmental factors.

3. Precise manufacturing methods enable it to operate quietly.

4. The back groove design provides higher stability and flexibility.

5. The working temperature ranges from -65 ° F to+180 ° F (-54 ° C to+85 ° C)

The combination structure of the wide-angle belt improves the stability of the belt and prevents it from flipping or detaching from the pulley.

7. Belt length: from 180mm to 2300mm.

Loading and unloading of belts. Before installation, first check whether the driving wheel, driven wheel, and tensioning wheel are on the same plane. Generally speaking, when the center distance between two pulleys is less than 1 meter, the allowable deviation is 2-3 millimeters, and when the center distance is greater than 1 meter, the allowable deviation is 3-4 millimeters. If the deviation is too large, it should be adjusted to meet the requirements before installation and tensioning. When loading and unloading, the tensioner should be loosened first, or the infinitely variable speed end disc should be removed first, and the belt should be installed or removed. When the new V-belt is too tight and difficult to install and remove, the pulley should be removed first, and then the V-belt should be fitted or removed before installing the pulley. Hard removal is not allowed. Generally, the V-belt should be disassembled and installed after removing the pulley. The tension of the belt. The tension of the transmission belt is adjusted by the tensioning wheel. If the belt is too tight, it will cause serious wear and tear, and if it is too loose, it is easy to slip, causing serious wear and even burning of the V-belt. When the distance between two wheels is about 1 meter, press the middle of the triangle belt with your fingers and it should descend vertically by 10-20 millimeters. During use, the tension of the V-belt should be checked and adjusted at any time. Belt replacement. After the effectiveness of the V-belt, it should be replaced in a timely manner. If multiple V-belts are used together, if one or part of them are ineffective, the other ones should be replaced at the same time, and new and old belts should not be used together. Cleaning of the belt. When the V-belt is stained with grease, engine oil and other oil stains, it is easy to slip and accelerate the damage of the V-belt. It should be cleaned with gasoline or alkaline water in a timely manner, and cannot be operated with oil. The working temperature of the belt.

Gates' Polyflex polyurethane V-belt is a belt with a manufacturing process that can provide higher loads and higher precision drives at high speeds, which is a significant cost reduction and improves design space. It is recommended for use in grinding machines, lathe drives, woodworking and metal machinery drives, computer peripherals, small blowers, and other equipment. The main series of Polyflex wide-angle belts include 3M, 5M, 7M, and 11M.
The main features of Polyflex V-belts are: the linked belt has high stability; The tooth profile on the back releases bending stress and provides lateral rigidity; A belt angle of 60 ° provides more support and load distribution for the wire rope with the bottom adhesive
More uniform; The small section model meets the requirements of special applications such as high shaft speed, compact drive size, and smooth operation; Using high modulus polyurethane with high friction coefficient, this precise molding method eliminates overlap and delamination; *The tension line and the adhesive force of polyurethane make the belt have high fatigue and long life; Polyurethane is resistant to fatigue, wear, and ozone.

广角带7M参数7 M410、7M1090、7M500、 7M1120、7M515、7M1150、7M530、7M1180、7M545、7M1220、7M560、7M1250、 7M580、7M1280、7M600、7M1320、7M615、7M1360、7M630、7M1400、7M650、7M1450、7M670、7M1500、7M690、7M1550、7M710、7M1600、7M730、
7M1650、7M750、7M1700、 7M775、7M1750、7M800、7M1800、7M825、7M1850、7M850、7M1900