Industrial spray dedusting equipment manufacturer

With the continuous improvement of mechanization, the production efficiency of industry has also greatly increased. As a result, the dust concentration continues to increase, especially in material yards, sand and gravel yards, construction sites, workshops and other places where the dust concentration exceeds the standard. This not only threatens the health of workers, but also causes serious pollution to the ecological environment. Importantly, many factories have stopped production due to dust problems, resulting in serious losses. So how can we effectively solve the dust problem? look forIndustrial spray dedusting equipment manufacturerThat's right.

There are many dust removal equipment manufacturers on the market now, why choose themIndustrial spray dedusting equipment manufacturerWhat about it? Simply put, it is because of its high cost-effectiveness. For example, spray equipment can also achieve the effect of dust reduction. Like spray equipment, spray equipment also uses the hydrophilicity of dust to increase the weight of dust, and the dust falls to the ground under the action of gravity. However, the practicality of sprinkler equipment is not high because the water particles sprayed are relatively large, which can easily cause water accumulation problems. For example, in the process of coal mining, drainage is a very important issue, and channel water accumulation can easily lead to accidents such as collapse. In addition, the sprinkler equipment does not fully utilize water resources, which not only increases the cost of water sources, but also wastes water resources. According to customer feedback, currently the most cost-effective industrial dust reduction equipment on the market is the high-pressure micro mist humidifier.

Working principle of dust spray: ordinary water passes through a specific water filtering device, and the filtered water is pressurized to more than 4.5Mpa through a high-pressure host group. Then the high-pressure water is impacted by a high-pressure pipe through a jewel impact needle nozzle to change the velocity distribution of the jet cross section, so that large particles of water droplets are broken and atomized into small particles. Under the effect of aerodynamic force, small particles of water droplets are further broken and atomized into numerous "fine fog" with a diameter of 5-15 microns. Because the diameter of the fog particles is very small, they can float in the air for a long time. When the fog particles touch the suspended dust in the air, they will attach to the dust and gradually become integrated. When the weight of the suspended dust in the air increases to a certain extent, it When the gravity of is greater than the buoyancy, it will fall to the ground, so as to achieve the purpose of dust removal and air purification.

What are the benefits of using spray equipment?

1. Resource saving: The area of dust reduction is different between one kilogram of water and one kilogram of mist. After water turns into mist, the area that can capture dust is also larger, which relatively saves more water resources. And due to the relatively small size of atomized particles, they stay in the air for a long time, increasing the air humidity and effectively suppressing dust flying.

2. Reduce the occurrence of floating dust. After water turns into mist, the atomized particles become more dense, which can comprehensively capture floating dust in the air, have stronger dust suppression ability, and higher efficiency.

3. Low overall cost. Using high-pressure micro fogging equipment to atomize water results in high water utilization efficiency, low water consumption, low usage cost after a single investment, and low maintenance costs, making it economical and practical,

4. No secondary pollution occurred. The way of spraying water to reduce dust sometimes causes ponding problems because of the poor control of water volume. In some coal mines, quarries, mixing stations, etc., it is very likely to cause secondary pollution. However, using the spray way of high-pressure system, atomized water will not gather because of too much, so secondary pollution will not occur.

5. It can achieve intelligent control. Both manual and automatic control can be achieved, and the operation of the high-voltage system is very simple. Only the required humidity or time requirements need to be adjusted, without the need for dedicated personnel to guard.

Zhengzhou Dexincheng Environmental Protection Equipment Co., Ltd. has been dedicated to the production of environmentally friendly and green high-pressure spray dust suppression equipment. Since its establishment for more than ten years, it has been committed to the research, development, production and promotion of spray dust suppression systems. Its products have been applied to various industries such as industrial dust suppression, textile, electronics, printing, food, chemicals, plastics, tobacco, leather, landscape spray, agriculture, animal husbandry, laboratories, constant temperature and humidity workshops, and has provided energy-saving humidification and dust suppression solutions for enterprises.