Inflatable firefighting and rescue air cushion

NegotiableUpdate on 01/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SD48M2 inflatable fire rescue air cushion is made of special tensile resistant fibers. The top surface of the air cushion has a clear bullseye pattern, making it convenient for evacuees to aim at the target. Fast and practical, only two people are needed to complete the inflation work and quickly put it into use.

Product Details

　　1、 Product Features

1. Escape cushion is an inflatable cushion used to rescue individuals who jump from high places. It can reduce the impact on the landing personnel and provide cushioning and protection.

2. The escape cushion fabric is made of special strong fiber cloth. High tensile and tear strength, can be folded freely.

3. The product structure is mainly divided into three parts: low-pressure upper layer receiving surface air cushion, emergency high-pressure lower layer protective surface air cushion, and independent high-speed fan connected air cushion inlet duct. The operation process is to use a fan to continuously inflate the entire air cushion, in order to receive free falling personnel and prevent them from bouncing or touching the ground when they land on the air cushion receiving surface!

4. When personnel jump onto the air cushion, the cushion does not tilt or roll over!

充气消防救生气垫

　　2、 Features:

Made from special tensile resistant fibers. The top surface of the air cushion has a clear bullseye pattern, making it convenient for evacuees to aim at the target. Fast and practical, only two people are needed to complete the inflation work and quickly put it into use.

　　3、 Basic parameters of SD48M2 inflatable fire rescue air cushion

Model number	SD24M2	SD48M2
Unfolding area (m2)	24	48
Expand length, width, and height (m)	462.5m	682.7m
Weight (kg)	55	81
Packaging size (cm)	867536	988650
Basic parameters of fan
Voltage (V)	Frequency (Hz)	Power (W)	fan diameter	traffic	Wind pressure (Pa)	speed	Weight (kg)
Voltage (V)	Frequency (Hz)	Power (W)	（mm）	（m3/h）	Wind pressure (Pa)	（r/min）	Weight (kg)
220V	50	520	300	4620	373	2800	14.95
Basic parameters of high-strength fiber cloth
	Tensile strength（N/5cm）		Tear strength (N/5cm)		Adhesion strength	Cold resistant (℃)	Heat resistance (℃)
weight	Tensile strength（N/5cm）		Tear strength (N/5cm)		（N/5cm）
g/m2	warp	Dimension oriented	warp	Dimension oriented
520	2400	2100	300	300	60	-30	70

　　4、 Usage method

1. Remove the air cushion from the packaging bag, untie the binding tape, and transport it to the appropriate location;

2. Lay the air cushion flat on the ground to ensure a smooth deployment. Pay attention to checking the ground for sharp objects such as stones, glass, and iron nails;

3. Remove the two fans from the packaging box and securely connect them to the two air ducts of the air cushion using quick Velcro on the binding tape. Be careful not to twist the air ducts to ensure smooth airflow;

4. Connect two fans to 220V AC power, turn on the power switch, and at this time, the fans quickly inflate into the air cushion. Check for any obstruction to the airflow at any time, and organize the air cushion to ensure smooth airflow;

5. When evacuees jump from a height, they should align with the blue field shaped frame in the middle of the air cushion and ensure that their back is in contact with the air cushion. If used continuously, the air cushion must be fully inflated before each use;

6. After use, exhaust the air inside the air cushion, wipe it clean, tidy it up, stack it up and put it in a packaging bag, and place the fan in the packaging box.

　　5、 Storage method

1. The escape cushion should be stored in a ventilated, dry, and cool place, avoiding prolonged direct sunlight and storing it together with flammable and explosive materials, acidic and alkaline chemicals, and sharp objects;

2. Regularly check the condition of the air cushion, and if any damage or corrosion occurs, resolutely prevent its reuse.