Integrated business optical transceiver

Integrated business optical transceiver

System design plan: Install sound and light alarm lights and monitoring probes in the duty room, standby room, and each floor. The sentry and mobile duty points can trigger relevant alarm switches according to different alarm situations. The duty room, standby room, and each floor will simultaneously emit different colored alarm lights, sirens, and broadcast different voices.

This system can integrate infrared alarms, sub tank alarms, weapon library alarms, wireless alarms, power grid alarms, and video surveillance. The system can connect to the alarm voice server and broadcasting system to broadcast alarm situations and disposal plans. And it can be connected to the monitoring system to achieve alarm image tracking and switching, and can be connected to the linked alarm system to upload alarm signals.

Integrated business optical transceiver

Video metrics

Video interface 1-8 forward and reverse directions

Video interface type BNC

Video input/output impedance 75 Ω (unbalanced)

Typical peak value of video input/output voltage is 1.0V, maximum value is 1.5V

Video bandwidth 8MHz

Differential gain<1% (typical value)

Differential phase<1 ° (typical value)

Signal to noise ratio (weighted)>62dB

Alarm data indicators

Data interface 1-4 unidirectional or bidirectional (applied to the sub tank alarm interface)

Data interface type RJ45 crystal plug

Data interface signals RS-232, RS-485, RS-422, Mancode TTL

Code rate 0~256Kbps

Error rate<10-9

Audio indicators

Audio interface 1-8 bidirectional (capable of audio and intercom transmission)

Industrial standard wiring terminals for audio input and output impedance

Audio input/output level 0dBm (typical value)

Frequency response 10Hz~20KHz

Audio digital bit width 24 bits

Ethernet specifications

Network interface: 1 shielded RJ-45 interface

Support protocol IEEE802.3u 10/100Base TX

Working mode: full duplex/half duplex

Delay<23Bit

Error rate<10-9

Telephone indicators

RJ45 interface 1-8 channels

Loop impedance:<=2000 ohms

Idle circuit voltage<=50 volts

Loop current: 25mA

Off hook threshold: 8mA

Other indicators

Mean Time Between Work (MTBF)>100000 hours

Working temperature -40~70 ℃

Storage temperature -40~85 ℃

Working humidity 5~95% (no condensation)

Storage humidity 0~95% (no condensation)

Dimensions 480 (L) × 280 (W) × 37 (H) mm

Input voltage 220V or+5V optional

Optical interfaces ST, FC, SC are optional