MIC 20 Ultrasonic/Leeb Dual purpose Hardness Tester Combination Hardness Tester

MIC20 Ultrasonic/Leeb Dual purpose Hardness TesterProduct Overview:

MIC20 Ultrasonic/Leeb Hardness TesterThe first time quasi-staticUCI method (ultrasonic contact impedance method) anddynamicIntegration of rebound hardness testing methodThere can be1001 applications.The MIC 20, which combines into one, has become a universal hardness tester: it can be used to detect materials or heat-treated surfaces with different qualities and shapes of fine texture (UCI method), as well as for hardness testing of large coarse-grained components, forgings, and castings (rebound method).thisThere are two methods that allow you to measure the hardness of the object being tested in just a few seconds，You can take measurements anywhere and in any direction.

MIC20 Ultrasonic/Leeb Hardness TestercanConvenient and fast calibration, capable of displaying measurement results according to commonly used hardness systems. Handle daily on-site inspections with ease. MIC20 can not only meet a specific application, but also expand its functions economically and conveniently by equipping corresponding probes or impact devices, which is equivalent to adding a hardness tester.

MIC20 Ultrasonic/Leeb Dual purpose Hardness Tester detectionmethod： 1UCI method (ultrasonic contact impedance method)：After applying the test load, the hardness of the material is determined by measuring the size of the indentation left by Vickers diamond behind the material.2Rebound method（Complies with ASTM standard A956 specification）：An impactor is pushed onto the detection surface by elastic force，The impact velocity and rebound velocity are both measured through non-contact mode, and the hardness value is obtained through these two values.The rebound ratio (Rp) and impact velocity (lp) when the hardness output is Leep HL=1000Rp/lp.Once you connect a UCI probe or a rebound impact device, MIC20 will automatically set the corresponding detection method.

MIC20 Ultrasonic/Leeb Dual purpose Hardness TesterproductFeatures:

1Combined with UCI method (ASTM) The quasi-static hardness test of A1038 and the rebound method according to ASTM Hardness tester for dynamic hardness testing of A9562The UCI probe is suitable for hardness testing on surfaces with fine textures, complex shapes, or heat-treated surfaces3Rebound impact equipment is used for large components with rough textures and materials for forging and casting4The test results are automatically converted between HV, HB, HRC, HRB, HS, HL, and N/mm2 standards5Convenient input of alphanumeric data through buttons and/or built-in touch screen operation6Power supply: AC (100V-240V) or nickel hydrogen battery7Internal data recording, capable of recording approximately 5000 series of measurement values8Quick and simple calibration can be performed based on different testing materials, and calibration data can be stored and retrieved again9No directional measurement, no need to input any correction factors10Large color TFT screen displaying all measurement related information, such as average, individual values, or statistical numbers11Clear arrangement of data storage enables simple and orderly storage of measurement results. Series measurement values can be retrieved and edited

MIC20 Ultrasonic/Leeb Dual purpose Hardness TesterScope of application：

MIC20 can meet your various application requirements.For example, using the UCI detection method:1On the assembled equipment2In the heat affected zone of welding (such as pipelines)3On coatings (such as in the printing industry)4On hardened surfaces such as tooth root surfaces or tooth groovesFor example, using the rebound hardness testing method:1On motor units or equipment made of steel and cast aluminum alloys2On sturdy rough particle components with rolled surfaces3On large series components in the production process4Distinguish and screen materials5On forged copper alloy

MIC20 Ultrasonic/Leeb Dual purpose Hardness Tester Probe details:

MIC20 Ultrasonic/Leeb Dual purpose Hardness Tester Technical Specifications：

MIC20 Ultrasonic/Leeb Dual purpose Hardness Tester Basic ConfigurationAnd attachments：MIC20 host；TFT color LCD display；AC adapter；NiMH battery charger (100 to 240 VAC adaptive)；

NiMH rechargeable battery；instrument case；Operation Manual.

Attachment：

Transport box, multiple guiding and supporting devices (UCI method), testing accessories (rebound method), hardness reference plate, as well as certified test blocks, NiMH batteries, battery driven polishing kit for surface treatment, printing cables, application software, data transmission cables