Multi functional high-altitude wiring pliers

TD-1168Multi functional high-altitude wiring pliersIt is a fixture used for temporary wiring during testing or maintenance of electrical equipment.

2、 Detailed description:

TD-1168Multi functional high-altitude wiring pliersIt is a fixture used for temporary wiring during testing or maintenance of electrical equipment. For many years, when testing or repairing electrical equipment that cannot be directly touched, operators have been required to climb up and connect wires, which is labor-intensive and unsafe. To solve this technical problem, the technical personnel of Baoding Woda Electric Technology Co., Ltd., with the strong support and assistance of the on-site staff in the power system, have successfully developed this fixture suitable for on-site use after years of research, exploration, and repeated experiments on site----Multi functional high-altitude wiring pliers.

TD-1168Multi functional high-altitude wiring pliersThe emergence of this technology has shifted traditional high-altitude operations to the ground, fundamentally solving the dangers of climbing and greatly improving the working conditions for on-site operators. This product has been awarded the utility model certificate by the * bureau.

1、 Main features:

1. Easy to operate. Use the operating rod to hang the upper clamp of the wiring pliers at the position where wiring is required. By pushing and pulling the operating rod, the clamp can be freely opened and closed to complete the wiring work. The opening size of the wiring clamp is large (70mm) and equipped with a guiding mechanism, making it extremely convenient to hang the clamp.

2. Strong clamping force. The principle of using a movable pulley to save effort between the upper and lower jaws of the wire clamp allows for greater clamping force with less pulling force.

3. The wiring pliers are equipped with clamping force locking and releasing devices inside. When pulling the lever, the inside of the pliers

The elastic energy storage device can automatically lock the jaws with any required force. If the operating rod is not pushed, the self-locking device will never open on its own, and its performance is reliable. When pushing the control lever,

The release device inside the clamp can open the clamped jaws, making the operation very convenient.

4. Good contact. The wiring clamp has the function of overcoming the oxide film while clamping, ensuring good contact between the clamp and the wiring position.

5. Short term high current and strong overload capacity.

6. Strong practicality. The angle of the clamp head of the wiring clamp can be changed, and it can complete the wiring work of testing or maintenance grounding at different angles, thicknesses, diameters, and heights below 8 meters.

7. Lightweight and easy to use. The structural design is reasonable, the texture is excellent, and it is durable. The weight of the pliers head is less than 700 grams.

2、 Usage:

1. Install the wire clamp on the required length of operating rod, install the voltage and current wires on the wire terminals of the clamp clamp, and then divide the wires into sections (one near the clamp)

Be sure to reserve a 20cm margin and fix it on the operating rod.

2. Adjust the clamp head of the wiring pliers to approximately the same angle as the wiring position (if the wiring position is perpendicular to the ground, a spare guide hook needs to be replaced).

3. Lift the wire clamp with the operating rod until the clamp head is slightly higher than the wiring position, gently rest it on the wiring position, and rely on the guide mechanism on the wire clamp to slowly slide down to clamp the clamp on the wiring position. Then slowly pull the operating rod with force (do not apply too much force), and the clamp mouth will be clamped.

4. When removing the wire clamp, simply push the operating rod towards the direction of the wire clamp with force, and the clamp will open.

3、 Precautions for use:

1. Before use, it is necessary to carefully read the user manual.

2. When using, it is necessary to maintain a safe distance from live equipment!

When using wire pliers, wires are always connected. When lifting or lowering them, a safe distance must be maintained between them and the surrounding live equipment, and special attention must be paid to safety!

3. If the jaws are clamped on the screw, the clamping force is small, or the connecting wires have poor contact, it will affect the test results.

4. Be careful when removing after use.

5. Do not artificially push the lower jaw of the wire clamp upwards, bend or squeeze the steel wire rope inside.

6. Pay attention to adding lubricating oil to the sliding parts and avoid dust from entering.

7. After use, it should be stored in a clean and dry place.

4、 Packing list (per set):

1. 2 pliers heads

2. 2 6-meter telescopic insulation rods

3. 1 aluminum alloy outer packaging box

4. 1 copy of instruction manual

5. 1 certificate of conformity

5、 Ordering and Service

In case of product quality issues, the company's engineering and technical personnel will respond within 24 hours.

From the date of purchase, there is a one-year warranty and lifetime maintenance.

Our philosophy is "integrity-based, strength first, wholeheartedly for customers". The company adheres to the business philosophy of customer first and service first, and guarantees customers to gallop on the high-speed road of the information age with our service quality, professional technical service strength, and technical customer service team. With the spirit of stability, development, loyalty, efficiency, unity, and innovation, we respect talents and pay attention to technology, so that customers can continuously benefit while enjoying the achievements of information technology development.

Our quality policy: Taking customer needs as the purpose, technological innovation as the driving force, strict management as the guarantee, and level as the goal, we provide satisfactory products and services for our customers. Our values: unity and harmony, shared aspirations, honesty and trustworthiness, respect for innovation, rigor and discipline, pursuit