Nanjing Electronic Storage Cabinet

　　Nanjing Electronic Storage CabinetThe system is equipped with a centralized control device and multiple storage cabinets on both sides. There is a printer inside the centralized control device for issuing receipts,Nanjing Electronic Storage CabinetAn LCD display with a touchpad, a card reader that receives radio waves from a non-contact IC card C as a "reading device", an infrared component that receives infrared radiation from a portable device, an identification machine for recognition and authentication, and a coin detection machine for coin recognition.To learn more, please click:

On the panel of the centralized control device, there is a receipt outlet for discharging receipts from the printer; As the operation display part of the LCD display window; An antenna unit for transmitting and receiving radio waves using a card reader 1C, an infrared receiver unit for receiving infrared radiation using an infrared component, a feeding port for the identification machine, a coin insertion port for inserting coins into the coin detection machine, a coin return port for retrieving coins from the coin detection machine, and a coin return rod.

And each storage cabinet box has a locking device inside its door. Used to open and lock the storage cabinet door based on control signals from the centralized control device; Door opening and closing switch, detect the opening and closing status of the storage cabinet door; Lock switch, set on the frame part of the locking device side; Lock confirmation LED, set on the upper part of the lock switch; And LED for status display, set near the locking device of the storage cabinet door.

The centralized control device 1 has a control unit (control section) composed of a microcomputer and a power supply. A printer, LCD display, card reader 1C, infrared component, barcode authentication machine, coin detection machine, and locking devices for each storage cabinet box are connected to the control unit. Moreover, door opening and closing switches, locking switches, locking confirmation LEDs, and status display LEDs are respectively connected to the locking device through a substrate. The control unit outputs printing data to the printer, displays data to the LED display, and checks the operation status.