PYX-DHS-BS/TBS series waterproof electric constant temperature incubator

1structural characteristics

1. The device adopts a new intelligent digital temperature control instrument with single-chip computer technology. During measurement, the upper window displays the measured temperature, and the lower window displays the set or running time (when there is a time setting). Display various parameters during setup.

2. The outer shell of the box is welded with thin steel plates, and the water tank and inner liner are made of stainless steel. The insulation layer is filled with insulation material to maintain good insulation performance of the box. The external spraying process and decorative parts are beautiful and not easy to rust. Novel and aesthetically pleasing design.

3. The outer door of the incubator is made of high-quality steel plateThe glass door of the inner door is tightly sealed with the frame inside the box, making it easy to observe the experimental situation intuitively. The outer door and the frame of the box are tightly sealed with special rubber strips to prevent hot air from escaping. The control system is located inside the control box on the left side of the box for easy maintenance and replacement.

1. Temperature control range: room temperature+5 ℃~60 ℃

2. Temperature fluctuation: ≤± 0.5 ℃

3. Temperature uniformity tolerance: ± 1 ℃

4. Display accuracy: 0.1

5. Working power supply:~220V/50Hz

6. Other parameters are shown in the table