Plastic Melt Index Tester (GT-7100-MIBH)

NegotiableUpdate on 02/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The local measurement method is to measure the extrusion rate of molten plastic through a specified length, diameter, and fine hole mold using a timed measurement method under specified conditions such as temperature, load, and piston position inside the barrel, in order to determine the extrusion rate of polymer flow rate.

Product Details

1、 Product Introduction
The local measurement method is to measure the extrusion rate of molten plastic through a specified length, diameter, and fine hole mold using a timed measurement method under specified conditions such as temperature, load, and piston position inside the barrel, in order to determine the extrusion rate of polymer flow rate.

2、 Technical parameters
Product specifications: ASTM-D1238、CNS-8516、ISO-1133、JIS-K7210、GB/T 3682-2000、ASTM D3364

temperature control	Room temperature~450 ° C, dual temperature control, PID control, accuracy ± 0.1 ° C (including over temperature protection)
Temperature Display	HMI
load	1000g , 1050g , 1200g , 2160g , 3800g , 5000g , 10000g , 12500g , 21600g , Combination selection
Applicable material flow rate range	0.15~900g / 10min
print	MFR, MVR, FRR (optional)
Automatic cutting device	Automatic cutting, button cutting can be selected, set time from 0.1 to 999.9 can be set arbitrarily
Load application method	Pre set test load automatic positioning and pressure application
Attachment	One pressurized weight rod One ramming rod One tube connector One copper wire cleaning brush Two fine pore mold measuring gauges One fine hole mold cleaning drill Electric wood feeding funnel, one Observation mirror one
Volume (W × D × H)	60× 51 × 76 cm
weight	55 kg (excluding weights)
power supply	1 #, AC 220V, 50/60Hz, 5A (depending on country or specification)

If there are any changes or variations to the product specifications and content, please refer to the actual quotation data provided by our company.