- Phone
-
Address
B210, Silicon Valley Bright City, No.1 Shangdi South Road, Haidian District, Beijing
Product Categories
Beijing Jinkun Technology Co., Ltd
RF optical transceiver series
NegotiableUpdate on 05/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The ROF030PU-XU series RF optical transceiver is a standard rack mounted device designed by Beijing Jinkun Technology to transmit RF and microwave signals through optical fibers, and can be directly placed in a rack for use. The device adopts a host mounted module approach, which has the advantage of flexible configuration of signal channel numbers. It has the characteristics of low-cost equipment and high performance. Widely used for various RF signal transmission, remote and microwave signal conversion to optical signal processing.
Product Details
Advantages:
1. High bandwidth
2. Anti electromagnetic interference
3. Support wavelength division multiplexing with one fiber optic transmission for multiple signals
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume
7. Applicable to * work standards.
Application scenarios
1. Pull the radar antenna far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. Microwave signal transmission coverage
5. Electronic Warfare
6. Radar signal delay
Host type selection
The host has1Uhost and4UHost options available. A 1U chassis can support 5 signals, while a 4U chassis can support 12 signals.
Parameter table:
|
model |
|
ROF030PU-1U |
ROF030PU-4U |
|
*Large number of selectable signal channels |
|
5 |
12 |
|
Module working mode |
|
built-in |
pluggable |
|
frequency range |
MHz |
one hundred |
|
|
– 3000link |
gain |
dB |
|
|
0 |
flatness |
dB |
|
|
≤ |
± 3 |
Attenuation adjustment range |
|
|
dB1~31input |
1dB |
Compression point |
|
|
dBm |
≥ |
0 |
|
|
VSWR |
NA |
10 |
|
|
≤ |
2:1 |
*Large input RF signal30 |
|
|
dBmNoise FiguredBm/Hz |
< |
50 |
|
|
input |
/ |
output impedance |
|
|
Ohm |
power supply method |
AC3220V |
|
|
power consumption |
W |
<(Single module)Laser output wavelengthnm |
|
|
1310/1550 |
（ |
WDM |
|
|
Optional) |
Laser output power |
dBm |
|
|
>0dBm |
Detector operating wavelength |
nm1100~1650 |
|
|
Fiber optic connector type |
NA |
FC/APC |
|
|
interface |
|
RF connector type |
|
NA |
|||
|
SMA |
Monitoring interface |
1 |
30 |
|
Ethernet port or serial port |
monitoring project |
-2 |
+8 |
|
Attenuation adjustment range |
dB |
5 |
200 |
|
Optical power range |
dBm |
-40 |
+70 |
|
Laser working current |
|
mAtemperature range |
℃size |
|
1U |
chassis |
|
4U45chassis+65Operating Temperature℃- |
|
~ |
(Optional) |
|
-55~+75 |
）
Storage temperature+25℃
-55~85
Note:
1.All indicators areCalibrate the indicator value at ℃, and temperature changes may cause slight changes in the parameters. Can be used normally within the temperature range indicated.
