- Phone
-
Address
B210, Silicon Valley Bright City, No.1 Shangdi South Road, Haidian District, Beijing
Product Categories
Beijing Jinkun Technology Co., Ltd
ROF030M RF optoelectronic module
NegotiableUpdate on 05/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The RF optoelectronic module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has a long distance, high bandwidth, and flat response, and is used in communication and radar systems.
Product Details
Beijing Jinkun Technology Co., LtdROF030MRF optoelectronic module
The RF optoelectronic module is used to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has a long distance, high bandwidth, and flat response, and is used in communication and radar systems. In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also be used toRFThe signal is converted into an optical signal and transmitted through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method. RF optoelectronic modules have different bandwidths8GHz, 15GHz, 20GHzProducts with different RF bandwidths, and others3GHz, 2.4GHz,1.5GHz
In the low-frequency range, unidirectional and bidirectional transmission systems can be selected as needed.
1. High bandwidth
2. Anti electromagnetic interference1310nm/1490nm/1550nm
3. Optional different wavelengths of light
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume.
7. Applicable to * * standards
Application scenarios
1. Pull the radar antenna far away
2. Long distance RF signal transmission
3. Radio signal monitoring
4. GPS、 Navigation signal transmission coverage in Beidou or other formats
5. Electronic Warfareparameter table:ROF030M
|
RF optoelectronic module |
parameter name |
unit |
|
indicator value |
frequency range |
MHz |
|
200– 3000 |
Link gain |
dBabout |
|
0dB |
flatness |
dB |
|
≤ ± 3input1dB |
Compression point |
dBm |
|
≥ 0 |
VSWR |
NA |
|
≤ 2:1 |
*Large input RF signal |
10 |
|
dBm |
|
Noise Figure |
|
<30 |
phase noise |
dBc |
|
< -130@1MHzinput/ |
output impedance |
50 |
|
Ohm |
power supply method |
VDC |
|
6~12V |
power consumption |
W<2(Single module |
|
) |
Laser operating wavelength |
nm1310/1550or |
|
WDM |
Laser output power |
dBm |
|
0 |
Detector operating wavelength |
nm |
|
1100~1650 |
Fiber optic connector type |
NA |
|
FC/APC |
RF connector type |
NA |
|
SMA |
|
|
|
environmental parameters |
Volume size |
mm |
85*60*18Beijing Jinkun Technology Co., LtdROF030M
RF optoelectronic moduleCommitted to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RFfiber optic transceiver，Fiber optic delay line，High speed optical switch，Uniform light spot environment,RF optoelectronic moduleand other products,Welcome to inquire!www.jonkon.com.cn，www.jon-kon.com，Contact number
