-
E-mail
supcon@supcon.com
- Phone
-
Address
No. 309 Liuhe Road, Binjiang District, Hangzhou City
Zhejiang Zhongkong Technology Co., Ltd
supcon@supcon.com
No. 309 Liuhe Road, Binjiang District, Hangzhou City
SCTRACE-PMThe series of ultra-low concentration smoke and dust online monitoring systems are designed for fixed pollution sources with smoke and dust emissions below 50mg/m³Continuous measurement design for ultra-high concentration particulate matter. The product has 6 patented technologies and adopts the β - ray absorption method to achieve automatic measurement of ultra-low smoke concentration. It has the characteristics of high measurement accuracy, strong anti-interference ability, and is not affected by changes in particle size, color, chemical composition, or environmental factors such as smoke humidity, temperature, and pressure. Suitable for measuring smoke concentration in fixed pollution source flue gas ducts with low smoke concentration, low flue gas temperature, and high flue gas humidity at the "two lows and one high" site.
performance metrics
Safe and stable C14 radioactive sources are exempt from national standards;
Fully meet the monitoring requirements for ultra-low particulate matter emissions (<5mg/m ³);
The flicker counting detection method has high measurement accuracy;The instrument sampling unit is heated throughout the entire process to prevent“Ultra low concentration particulate matter”
Particle condensation;
Power outage protection, automatic recovery of incoming calls, recording real-time and historical data;RS-485Output,4-20mA
Analog output;
Intelligent design, automatic operation, and simple maintenance;
Modular design, intelligent operation, long service life. |
measurement methodB |
||
Radiation absorption method+forward light scattering method |
measurement range0-10-50mg/m³ |
, can be set or customized |
measurement periodC14 |
The radioactive activity is less than 3 7MBq(l00uCi) |
zero drift |
<±2%F.S |
detector |
Scintillation counter |
Span Drift |
<±2%F.S |
detection limit0.1mg/ |
m³ |
Linear degree |
>0.9 |
output signal |
RS-485 output, 4-20mA analog output |
ambient temperature |
-5 to 55 ° C |
ambient humidity |
Relative humidity less than 85% RH |
Backblowing requirements |
>0.5MPa |
Power requirements |