Where can I buy 800 * 800 concrete vibration table in Tianjin

Concrete vibration table

1、 Application of concrete vibration table

The concrete vibration table is used in laboratories and on-site construction sites to form test specimens and compact various concrete components such as slabs, columns, beams, etc.

2、 Structure and working principle of concrete vibration table

The concrete vibration table is mainly composed of the table frame, vibrator spring and other components. The table top and frame are welded with steel plates and steel sections. The vibration table is composed of an electric motor and a pair of identical eccentric wheels. And it is installed at the center position of the tabletop (reverse side) through a pair of suspension couplings, which plays a smooth and vertical role during the vibration process.

3、 Main parameters of concrete vibration table

1. Table size: 800 * 800 mm

2. Vibration frequency: 2860 times/minute

3. Amplitude: 0.3-0.6mm

4. Vibrator power: 1.5 kW

5. Load: 200kg

4、 Installation, use and maintenance

1. Before installing the vibration table, the foundation should be laid first. When laying the foundation, the upper plane should be found horizontally and fixed bolts should be buried in the bottom beam bolt holes before installation. The fixing bolts must be tightened during installation.

2. Before the vibration table is installed and tested, drive for 3-5 minutes and then stop to check all fastening bolts. If they are loose, they must be tightened before use.

3. During the compaction process of the vibrating table cloth, the concrete products should be firmly fastened on the vibrating table. The products that need to be compacted should be placed symmetrically with the table to balance the load. The fastening device of the compacted products can be designed and configured by users according to their own needs.

4. The bearings of the vibrator should be regularly inspected, disassembled and cleaned, and the lubricating oil should be replaced to maintain good lubrication of the bearings and extend the service life of the vibrator.

5. The vibration table should have a reliable grounding wire to ensure safety.