Where to sell concrete anti-seepage test molds in Tianjin

Φ 175 * Φ 175 * 150 concrete anti-seepage test mold

Used for preparing anti-seepage test blocks. Suitable for forming various types of concrete specimens. It can also be used in buildings, bridges, etc., which are made of cast iron, steel, or engineering plastics. The inner surface should be machined flat and smooth, without sand holes or defects.

The upper diameter is 175mm, the lower diameter is 175mm, and the height is 150mm.

usage method:

Before each test block, apply a thin layer of engine oil on the inner wall of the test mold cavity.
2. When disassembling, loosen the butterfly nut on the joint bolt, loosen the butterfly nut on the shaft, and detach the joint bolt from the side template groove to remove the side template. After each demolding, try to wipe off the coating on the surface of each part and apply anti rust oil.