Which is a good hemisphere camera for facial capture

Which is a good hemisphere camera for facial capture

1,1/4'2 million pixel CMOS sensor;

2. Optional 3.6mm/6mm high-definition lens;

3. Adopting a single crystal 42mil 2W high-power infrared lamp;

4. IR Cut dual filter switching;

5. 3D noise reduction;

6. Ceiling installation, with wires coming out from the bottom;

7. Infrared distance is 15 meters.

Which is a good hemisphere camera for facial capture

Embedded RTOS design, TI Da Vinci DM365 high-performance processing chip;
● Sensor: 2 million pixel 1/4 'CMOS sensor; colorful 1.0Lux@F1.2 Black and white 0.1 Lux@F1.2 Support M12 \ \ M14 \ \ CS interface lenses; Supports dual filter switching, day night conversion, and photoresistor signal linkage;
Video processing: H.264 video encoding, supports dual stream, AVI format; Support adjustable bit rate of 0.5M~8Mbps;
Frame rate: 1 million pixels, 25 frames per second (fully real-time), supports adjustable frames per second from 1 to 25 frames per second;
Video resolution: Main stream: 1280 × 720 (recording resolution); Substream: 720 × 480, 640 × 360, 480 × 270, 320 × 180;
Network interface: 1 RJ45 Ethernet interface, 10/100M adaptive; Support network protocols such as RTSP/FTP/PPPOE/DHCP/DDNS/NTP/PnP;
USB interface: 1 USB interface, supports up to 64GB USB drive connection, supports front-end storage;
● Analog output: 1 analog video output, supporting CVBS standard, PAL/NTSC adjustable;
● Video parameter adjustment: brightness, saturation, sharpness, contrast, and image quality;
● Linkage alarm: high alarm functions such as video occlusion, motion detection, storage space, etc. (can set area and sensitivity);
Built in WEB, supports IE access, configuration, and upgrade;
● Input power supply: DC 12V 3A
Maximum power: less than 20W
● Operating temperature: 0 ° C – 45 ° C (32 ° F – 133 ° F)
● Working humidity: 10-90% relative humidity (without condensation)