Workshop spray dust suppression equipment Environmental protection dust suppression spray maintenance

Industrial spray humidification equipment is mainly used for cooling, dust reduction and humidification in workshops. It mainly uses high-pressure pumps to atomize ordinary water into 1-15 μ m fine atomized particles, which are sprayed into the air through atomizing nozzles, so as to humidify the air and reduce the powder concentration. Atomized particles absorb heat from the air and evaporate, which can achieve heatstroke prevention and cooling effects in a certain area. This is of great help to employees who are still working hard in the factory workshop during the scorching summer, as it can generally lower the temperature by 3-7 ℃.

We have had a detailed understanding of the commonly used spray equipment in the workshop before. We know that any equipment has a service life. No matter how high-quality the product is, it also needs routine maintenance. Today, let's take a closer look at it in detailWorkshop spray dust suppression equipment Environmental protection dust suppression spray maintenance .

1. After using the equipment for a long time, if you find that the high-pressure host water pump head is dripping water, you should check whether the sealing water ring of the equipment water pump head is worn. If there is wear, people should replace the sealing water ring of the equipment water pump head in a timely manner.

2. In order to keep the high-pressure host in good condition and ensure smooth operation of the humidification system, people should regularly clean the equipment, especially the atomizing nozzle. The water quality varies in different regions, and impurities in the water can block the nozzle. Cleaning or replacing the nozzle will allow the equipment to function normally. Generally, equipping a water source filtration system is a good choice to reduce the frequency of nozzle replacement.

3. If the pressure of the high-pressure spray dust suppression equipment is too high during operation, the nozzle of the equipment shall be cleaned or the nozzle filter element of the equipment shall be replaced. If the pressure is too low, people shall check whether the water source is sufficient and whether the pipeline has water leakage.

4. For the cleaning of the water tank. Generally, the high-pressure spray humidifier needs to simply clean the water tank after being used for a period of time, which is relatively simple. Some areas with good water quality may not need to do this work for a long time.

5. Some users use the high-pressure spray humidification equipment again after it has been out of service for a period of time, but the fog disappears. This is due to the fact that after a long time of inactivity, the impurities in the pipeline are washed into the nozzle directly when the machine is turned on, resulting in blockage or scrapping. It is recommended that users remove and save the nozzle when not in use.

The above is aboutWorkshop spray dust suppression equipment Environmental protection dust suppression spray maintenanceSome common measures, hoping to be helpful to you!