ZY-SGBJY-111 Intelligent Flash Alarm Device

One scope of application
The ZY-SGBJY-111 intelligent flash alarm is used in conjunction with various control and detection instruments that have voltage switches or no voltage contact switches. When the parameters during the process exceed the upper limit value, the intelligent flash alarm emits an audible and visual alarm signal and outputs an alarm contact to attract the attention of the operator and take measures.

II Functional Features
Eight input signals, corresponding to eight high brightness digital tubes or light-emitting modules, respectively displaying the current status of each channel
The testing function is activated by external contact switches or panel buttons
The silencing function is controlled by external contact switches or panel buttons

III Specification

Input signal: No voltage switch contact or voltage signal, voltage input allowable range is 4-24VDC
Display mode: Eight 0.8-inch high brightness digital tubes or light-emitting modules respectively display the current status of each channel
Alarm output: 1 relay alarm output, contact capacity AC220V/3A
Communication output: Interface mode - isolated serial bidirectional communication interface RS485/RS422/RS232/modem
Baud rate -300~9600bps, freely set internally
Power supply: Switching power supply 85-265VAC, power consumption below 4W

4： Product button function SET - Reset button ▲--- Test key ▼ --- Alarm output clear button CLR -- Mute button 5： Instrument outline drawing Dimensions: Width x Height x Depth 160×80×125mm Hole size: 152+0. 7 × 76+0. seven

● Terminal wiring diagram No voltage switch contact input Voltage signal input