The first high-performance lubricant developed by MENZEL METAL CHEMIE GmbH in 1989 was not expected to become the standard for metal processing. Originally used simply for drill bits or saws, it can now be used for almost all non mechanical and metal cutting processes, even deep hole drilling or high-speed machining on transmission lines. Menzel has become a pioneer in the market for quantity lubrication technology based on biodegradable high-performance oils. Relying on our years of experience, we continuously optimize the INDUTEC MS system.

Introduction to MENZEL model features:

3.1 MENZEL INDUSTREC MS spray Head Series

Features: NDUTEC MS SD represents the nozzle concept and can meet various requirements. The system is based on a coaxial nozzle that produces a circular nozzle with a 5 ° spray angle. By using special accessories, almost every application can produce different spray shapes and angles.

1). SD3 features: spray angle, no dripping, self-cleaning, control pressure: minimum 5.5- maximum 6.0 bar, spray pressure: maximum 6.0 bar

2). SD4 features: precision coaxial nozzle, with round nozzle, spray angle, non dripping, self-cleaning, size: 34.8mm x 13mm

German MENZEL spray head

INDUTEC MS coaxial nozzle with minimal lubrication technology

INDUTEC MS SD represents the nozzle concept, which can meet various requirements. The system is based on a coaxial nozzle that produces a circular nozzle with a 5 ° spray angle. By using special accessories, almost every application can produce different spray shapes and angles.

Due to its extremely small size, coaxial nozzles only require a small installation space. For inaccessible spray points, flexible accessories can be used for expansion.

This is the working mode of INDUTEC MS coaxial nozzle

This coaxial nozzle operates pneumatically. It is closed by a needle, which is pressed on the spray mouth by a spring. Push the needle backward by controlling the air pressure and release the spray port. The medium is supplied from a separate pressure vessel to the coaxial nozzle. Jet air is supplied through the third pressure pipeline. When the medium leaves the coaxial nozzle, it wraps the medium and bundles it into a precise, directionally stable, and fog free jet.

Almost anything can be sprayed

Thanks to the continuously adjustable pressure, any medium from water mixed cooling lubricants to extremely viscous cutting and stretching oils can be sprayed. The nozzle can be modified with other sealing materials to use corrosive media.

Even the smallest quantity can still be precisely controlled

According to the application situation, appropriate modifications must be made to adapt the corresponding coaxial nozzle to special requirements. The following overview allows you to gain a deeper understanding of the reasonable combination of various parts in possible application areas.

By using a special SID internal nozzle plugin for conversion, the flow rate of the material can be changed. The spray shape and spray angle can be changed by using different caps.

The theoretically calculated spray angle is approximate. The interaction between the medium and the jet air pressure is always decisive, but an appropriate ratio must always be maintained between the two. Therefore, in order to determine accurate values, on-site testing is absolutely necessary.

Standard equipment for all INDUTEC MS coaxial nozzles

Main body: stainless steel

Coaxial nozzle and needle: stainless steel

O-ring: Viton

Control air pressure: minimum 5.5- maximum 6 bar

Spray pressure: max. 6 bar

Medium pressure: maximum 6 bar

Spray air volume: about 106 l/min

(spray air inlet pressure 6 bar, hose length 1 m)

INDUTEC MS Basic System INDUTEC MS SD4

INDUTEC MS SD4

Coaxial nozzles are suitable for almost all applications.

External medium supply

INDUTEC MS Basic System INDUTEC MS FD4 Z2

INDUTEC MS FD4 Z2

The beam is even better for greater spray distances or for internal cooling.

External or internal medium supply (internal cooling)

Improved air flow through the second spray air connection

Spray air volume is about 180 l/min

(spray air inlet pressure 6 bar, hose length 1x 1 m 6 mm, 2x 0.5 m 4 mm)

INDUTEC MS Basic System