Introduction to Mini Motor Company

The Mini Motor brand was born in 1974, when we produced electric motors for the industrial sector. Mini Motor adds two additional components to metal and electricity: electronics and computerization. Industrial automation and mechatronics integration have always been our characteristics. Nowadays, Mini Motor can offer tens of thousands of products, including worm gear reduction motors, coaxial gear reduction motors and planetary reducers, brushless servo motors with built-in drivers, brushless servo gear motors, drivers and frequency converters. Nevertheless, Mini Motor's first product has always been quality, and we manufacture every day with diligence, passion, and a focus on fine details, as well as listening to our customers' voices.

Mini Motor product classification:

Mini Motor Motor

Mini Motor Coaxial Gear Motor

Mini Motor Worm Gear Motor

Mini Motor Driver

Mini Motor Brushless Gear Motor

Mini Motor cleaning products

4.1 Mini Motor Motor

4.11 Mini Motor single-phase asynchronous motor

Asynchronous motor: single-phase. The rated torque is up to 0.69 nm.

characteristic

Single phase asynchronous motor with a power of up to 210W.

Motor: 2-pole or 4-pole single-phase asynchronous motor, fully enclosed, externally ventilated.

Single phase hot melt circuit breaker winding level F. Protection level IP65, in compliance with IEC/EN 60529 standard. The power range is from 9 to 210W. The rated torque is up to 0.69 Nm.

Installation method version B5-B14.

Attention: To select a suitable electric motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

Selection elements of Mini Motor:

Mini Motor AM Series

Installation method

power

rotation speed

torque

Voltage

1.7 Current

What is the capacitance of 1.8 μ F

4.12 Mini Motor Three phase Asynchronous Motor

The Mini Motor AM series three-phase asynchronous motor has a rated torque of up to 0.69 nm.

A three-phase asynchronous motor with a power of up to 270 W

Motor: 2-pole or 4-pole three-phase asynchronous motor, fully enclosed, externally ventilated.

Single phase hot melt circuit breaker winding level F. Protection level IP65, in compliance with IEC/EN 60529 standard. The power range is from 9 to 270W. The rated torque is up to 0.69 Nm.

Installation method version B5-B14.

Attention: To select a suitable electric motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

Selection elements are the same as single-phase motors

Mini Motor Asynchronous Motor

4.2 Coaxial gear motor

4.2.1 Mini Motor Continuous Current Coaxial Gear Motor

Mini Motor ACC Series

Coaxial gear motor

EN: Coaxial gear motor. 37 W DC motor with permanent magnet.

United States: helical gear reducer. 1/20 HP DC motor with permanent magnet

Motor: A continuous current with a magnet, enclosed by an external ventilation device. Winding Class F. Power supply 12 or 24 Vdc. Absorbed power of 60W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear device: coaxial with die cast aluminum gearbox. Quenched and tempered gears have their shafts rotating on roller bearings. Lubricate with special long-lasting oil. The sealing ring is made of special high-temperature rubber (FKM). There are 15 available gear ratios (i) from 7.4 to 441.9. The rated torque is up to 5 Nm.

版本 B3-B5。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

Mini Motor PAC Series

Coaxial gear motor

EN: Coaxial gear motor. DC 75 to 150 W permanent magnet motor

United States: helical gear reducer. 1/10 to 1/5 HP DC motor with permanent magnet

Motor: Continuous current with magnet without external ventilation. Winding Class F. Power supply 12 or 24 Vdc. Absorbed power of 230W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear device: coaxial with die cast aluminum gearbox. Quenched and tempered gears have their shafts rotating on roller bearings. Lubricate with special long-lasting oil. The sealing ring is made of special high-temperature rubber.

There are 14 speed ratios (i), ranging from 6.48 to 372.8. The rated torque is up to 20 Nm.

版本 B3-B5。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

4.2.2 Mini Motor Coaxial Gear Motor with Planetary Gears

Mini Motor ACCE

Coaxial gear motor with planetary reducer

EN: Coaxial gear motor with final planetary reduction stage. 37 W DC motor with permanent magnet

United States: Straight helical gear reduction motor and final planetary reduction stage. 1/20 HP DC motor with permanent magnet

Motor: A continuous current with a magnet, enclosed by an external ventilation device. Winding level F. Power supply of 12 or 24Vdc. Absorbed power of 60W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear device: coaxial with the die cast aluminum gearbox in the first gear and coaxial with the planetary gear steel gearbox in the second gear. Quenched and tempered gears have their shafts rotating on roller bearings. Lubricate with special long-lasting oil. The sealing ring is made of special high-temperature rubber (FKM). There are 15 available gear ratios (i), ranging from 37 to 2209.5. The rated torque is as high as 23.5 Nm.

版本 B3-B5。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

Mini Motor PACE

Coaxial gear motor with planetary reducer

EN: Coaxial gear motor with final planetary reduction stage. 37 W DC motor with permanent magnet

United States: Straight helical gear reduction motor and final planetary reduction stage. 1/20 HP DC motor with permanent magnet

Motor: Continuous current with magnet, enclosed, no need for external ventilation. Winding Class F. Power supply 12 or 24 Vdc. Absorbed power of 230W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear device: coaxial with die cast aluminum gearbox in the first stage and coaxial with planetary gear steel in the second stage. Quenched and tempered gears have their shafts rotating on roller bearings. Lubricate with special long-lasting oil. The sealing ring is made of special high-temperature rubber (FKM). There are 13 available gear ratios (i), ranging from 48.7 to 1770.9. The rated torque is up to 90 Nm.

版本 B3-B5。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

4.2.3 Mini Motor Coaxial Gear Motor: Single phase or three-phase

Mini Motor AC Series

Coaxial gear motor AC

Coaxial gear motor with a torque of up to 5 nm

EN: Coaxial gear motor. Single phase and three-phase motors, with power ranging from 34 to 180W.

United States: helical gear reducer. Single phase and three-phase motors ranging from 1/18 to 1/4 HP

Motor: 2-pole or 4-pole single-phase or three-phase asynchronous motor, enclosed, externally ventilated. Single phase hot melt circuit breaker winding level F. Protection level IP65, in compliance with IEC/EN 60529 standard.

Gear device: coaxial with die cast aluminum gearbox. Quenched and tempered gears have their shafts rotating on roller bearings. Lubricate with special long-lasting oil. The sealing ring is made of special high-temperature rubber (FKM).

There are 14 available gear ratios (i), ranging from 6.48 to 372.8. The rated torque is up to 20 Nm.

版本 B3-B5。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

Mini Motor PA Series

EN: Coaxial gear motor. Single phase and three-phase motors, with power ranging from 34 to 180W.

United States: helical gear reducer. Single phase and three-phase motors ranging from 1/18 to 1/4 HP

Motor: 2-pole or 4-pole single-phase or three-phase asynchronous motor, enclosed, externally ventilated. Single phase hot melt circuit breaker winding level F. Protection level IP65, in compliance with IEC/EN 60529 standard.

Gear device: coaxial with die cast aluminum gearbox. Quenched and tempered gears have their shafts rotating on roller bearings. Lubricate with special long-lasting oil. The sealing ring is made of special high-temperature rubber (FKM).

There are 14 available gear ratios (i), ranging from 6.48 to 372.8. The rated torque is up to 20 Nm.

版本 B3-B5。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

4.2.4 Coaxial gear motor with planetary gearbox for Mini Motor: single-phase or three-phase

Mini Motor ACE Series

Coaxial gear motor with planetary reducer

EN: Coaxial gear motor with final planetary reduction stage. Single phase and three-phase motors ranging from 9 W to 74 W

United States: Straight helical gear reduction motor and final planetary reduction stage. Single phase and three-phase motors ranging from 1/56 to 1/9 HP

Motor: 2-pole or 4-pole single-phase or three-phase asynchronous motor, enclosed, externally ventilated. Single phase hot melt circuit breaker winding level F. Protection level IP65, in compliance with IEC/EN 60529 standard.

Gear device: coaxial with die cast aluminum gearbox in the first stage and coaxial with planetary gear steel in the second stage. Quenched and tempered gears have their shafts rotating on roller bearings. Lubricate with special long-lasting oil. The sealing ring is made of special high-temperature rubber (FKM). There are 15 available gear ratios (i), ranging from 37 to 2209.5. The rated torque is as high as 23.5 Nm.

版本 B3-B5。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

Mini Motor PAE Series

Coaxial gear motor with planetary reducer

EN: Coaxial gear motor with final planetary reduction stage. Single phase and three-phase motors ranging from 34 W to 180 W

United States: Straight helical gear reduction motor and final planetary reduction stage. Single phase and three-phase motors ranging from 1/18 to 1/4 HP

Motor: 2-pole or 4-pole single-phase or three-phase asynchronous motor, enclosed, externally ventilated. Single phase hot melt circuit breaker winding level F. Protection level IP65, in compliance with IEC/EN 60529 standard.

Gear device: coaxial with the die cast aluminum gearbox in the first gear stage, and coaxial with the planetary gear steel gearbox in the second gear stage.

The shaft of quenched and tempered gears rotates on roller bearings. Lubricate with special long-lasting oil. The sealing ring is made of special high-temperature rubber (FKM). There are 13 available gear ratios (i), ranging from 48.7 to 1770.9. The rated torque is up to 90 Nm.

版本 B3-B5。

4.3 Worm Gear Motor

4.3.1 Mini Motor Worm Gear Reduction Motor: Continuous Current

Mini Motor BC2000 12-24MP

12/24 MP worm gear reduction motor

characteristic

EN: Gear reduction motor. DC motor, up to 37W. Center distance of 20mm

United States: Worm gear reduction motor. DC motor to 1/20 HP. Center distance 0.787 inches

Motor: Continuous current with magnet, enclosed. Winding Class F. Power supply 12 or 24 Vdc. Absorbed power of 60W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear unit: equipped with worm gear and die cast aluminum gearbox. The center distance is 20 millimeters. The CARO bronze crown has a hardness of 120 ÷ 160 HB. The worm gear is made of tempered steel and comes with a grounding wire. The sealing ring is made of special high-temperature rubber (FKM). Lubricate with special long-lasting oil. There are 6 available gear ratios (i), ranging from 10 to 80. The rated torque is as high as 5.2 Nm.

版本 B3-B14。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

These gear motors need to be run in. Therefore, during approximately the first 30 working hours, the torque will be lower than the torque indicated in the data.

1.2 Mini Motor MCC

EN: Worm gear reduction motor and final planetary reduction stage. 37 to 150 W DC motors with permanent magnets. The center distance is 26 millimeters.

United States: Worm gear reduction motor and final planetary reduction stage. 1/20 to 1/5 HP DC motor with magnet. Center distance of 1.02 inches

MP MOTOR: Continuous current with magnet, enclosed by external ventilation device. Winding Class F. Power supply 12 or 24 Vdc. Absorbed power of 60W. Protection level IP 65, compliant with IEC/EN 60529 standard.

MP3N-MP4N motor: continuous current with magnet, enclosed, no need for external ventilation. Insulation level F. Power supply 12 or 24 Vdc. Absorbed power of 230W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear unit: equipped with worm gear and die cast aluminum gearbox. The center distance is 26 millimeters. The CARO bronze crown has a hardness of 120 ÷ 160 HB. The worm gear is made of tempered steel and comes with a grounding wire. The sealing ring is made of special high-temperature rubber (FKM). Lubricate with special long-lasting oil. There are 10 available gear ratios, ranging from 5 to 80. The rated torque is up to 9 Nm.

Version B3-B5 (left B5/S-right B5/D).

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

These gear motors need to be run in. Therefore, during approximately the first 30 working hours, the torque will be lower than the torque indicated in the data.

Mini Motor PCC

4.3.2 Mini Motor Worm Gear Reduction Motor with Planetary Reducer

BCE2000 12-24MP

Worm gear reduction motor with planetary gearbox

characteristic

EN: Gear reduction motor with final planetary reduction stage. DC motor, up to 37W. Center distance of 20mm.

United States: Worm gear reduction motor and final planetary reduction stage. DC motor to 1/20 HP. Center distance 0.787 inches

Motor: Continuous current with magnet, enclosed. Winding Class F. Power supply 12 or 24 Vdc. Absorbed power of 60W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear device: equipped with worm gear and die cast aluminum gearbox in the first stage, and planetary gear steel gearbox in the second stage. The center distance is 20 millimeters. The CARO bronze crown has a hardness of 120 ÷ 160 HB. The worm gear is made of tempered steel and comes with a grounding wire. The sealing ring is made of special high-temperature rubber (FKM). Lubricate with special long-lasting oil. There are 6 available gear ratios (i), ranging from 50 to 400. The rated torque is up to 15 Nm.

版本 B3-B14。

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

These gear motors need to be run in. Therefore, during approximately the first 30 working hours, the torque will be lower than the torque indicated in the data.

Mini Motor MCCE

Worm gear reduction motor with planetary gearbox

characteristic

EN: Worm gear reduction motor and final planetary reduction stage. 37 to 150 W DC motors with permanent magnets. The center distance is 26 millimeters.

United States: Worm gear reduction motor and final planetary reduction stage. 1/20 to 1/5 HP DC motor with magnet. Center distance 1.02 inches

MP MOTOR: Continuous current with magnet, enclosed by external ventilation device. Winding Class F. Power supply 12 or 24 Vdc. Absorbed power of 60W. Protection level IP 65, compliant with IEC/EN 60529 standard.

MP3N-MP4N motor: continuous current with magnet, enclosed, no need for external ventilation. Insulation level F. Power supply 12 or 24 Vdc. Absorbed power of 230W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear device: equipped with worm gear and die cast aluminum gearbox in the first stage, and planetary gear steel gearbox in the second stage. The center distance is 26 millimeters. The CARO bronze crown has a hardness of 120 ÷ 160 HB. The worm gear is made of tempered steel and comes with a grounding wire. The sealing ring is made of special high-temperature rubber. Lubricate with special long-lasting oil. There are 9 available gear ratios, ranging from 37.5 to 400.

Version B3 (left B3/S - right B3/D) - B5 (left B5/S - right B5/D).

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

These gear motors need to be run in. Therefore, during approximately the first 30 working hours, the torque will be lower than the torque indicated in the data.

Mini Motor PCCE

Worm gear reduction motor with planetary gearbox

characteristic

EN: Worm gear reduction motor and final planetary reduction stage. 75 to 150 W DC motors with permanent magnets. Center distance of 32 millimeters

United States: Worm gear reduction motor and final planetary reduction stage. DC motors with permanent magnets ranging from 1/10 to 1/5 HP. Center distance of 1.26 inches

Motor: Continuous current with magnet, enclosed, no need for external ventilation. Insulation level F. Power supply 12 or 24 Vdc. Absorbed power of 230W. Protection level IP65, compliant with IEC/EN 60529 standard.

Gear device: Worm and die cast aluminum gears are used in the first stage, and planetary gear steel is used in the second stage. The center distance is 32 millimeters. The CARO bronze crown has a hardness of 120 ÷ 160 HB. The worm gear is made of tempered steel and comes with a grounding wire. The sealing ring is made of special high-temperature rubber. Lubricate with special long-lasting oil. There are 9 available gear ratios (i), ranging from 33.25 to 475.

Version B3 (left B3/S - right B3/D) - B5 (left B5/S - right B5/D).

Attention: To select a suitable gear motor, please refer to the relevant charts for duty cycle and maximum shaft load factor.

These gear motors need to be run in. Therefore, during approximately the first 30 working hours, the torque will be lower than the torque indicated in the data.