Welcome Customer !

Membership

Help

Nanjing Xinfan Biotechnology Co., Ltd
Custom manufacturer

Main Products:

smart-city-site>Article

Nanjing Xinfan Biotechnology Co., Ltd

  • E-mail

    3452523816@qq.com

  • Phone

    18013864368

  • Address

    Nanjing Jiangbei New Research and Innovation Park

Contact Now
How many samples can be used for DPX sealing agent
Date: 2025-11-26Read: 1

oneProduct Introduction:

The slice is sandwiched between a glass slide and a cover glass, and sealed with a sealing agent to prevent the slice from coming into contact with the outside air. This process is called sealing, which can preserve the stained slice and use a sealing agent with a suitable refractive index to clearly display the tissue cells in the material.

DPXSealing agent(DPX Mountant for histology)It can be used for sealing various slices, smears, and other routine procedures. If the packaging is roughly required for each sample50μlcalculate10mlcan be used for200 A sample seal.


:DPX sealed tablets

:100ml

:Room temperature sealing

:6month

twoBring your own materials:

1Cover glass

2, glass slides

3Microscope.

threeOperation steps(for reference only)

(one)tissue section

1After staining, try to absorb the staining solution as much as possible.

2Add1-2dropDPXApply the sealing agent onto the tissue slice, cover it with a cover glass, and allow the slice to come into contact with the sealing solution, avoiding air bubbles as much as possible.

3Observe the slices under a microscope.

(two)Other samples: Refer to adherent cell samples or tissue sections for operation.

four. Precautions:

1. For your safety and health, please wear lab clothes, protective goggles, and disposable lab gloves when operating.

2. This product is a disposable reagent and cannot be reused. After use, please dispose of it according to the laboratory's waste chemical disposal regulations and do not dispose of it at will.

3. This tablet uses synthetic carbon chains to replace aromatic (xylene, benzene, etc.) benzene rings, thus minimizing the environmental hazards of the reagents.

4. When using, wear laboratory clothes, protective goggles, and disposable laboratory gloves to avoid contact between the product and the skin or any part of the body. Pay attention to eye protection and wear experimental protective goggles to prevent splashing. If it splashes into the eyes, immediately rinse with plenty of water and seek medical attention as soon as possible.

This product is only for scientific research experiments and is strictly prohibited from being used for clinical medical, edible, cosmetic, or other purposes