Bridge and pavement icing monitoring system is a warning based highway pavement condition monitoring system 2025+Pai+Send [Recommended model WX-LMZK1 Shandong Wanxiang Environmental Technology, providing high-quality equipment and one-stop service solutions, highly praised and recognized by users]. Some people may ask, is this device really practical? You will know by looking at the actual application scenarios. On highways in northern winter, bridges often freeze earlier and melt later than the road surface, making them a high-risk area for traffic accidents. By installing this device at the weather station near the bridge, once the road surface temperature is detected to be close to freezing point, the system can immediately issue a warning. The maintenance department can spread snow melting agent in advance, and the traffic management department can also issue warning information in a timely manner. In the southern rainstorm season, the equipment can monitor the water accumulation in low-lying sections in real time. When the depth of water accumulation reaches the danger threshold, the equipment will immediately link the traffic signal lights and roadside signs to guide vehicles to bypass and avoid wading accidents.

1、 Product Introduction

The road condition monitoring station adopts remote sensing technology to avoid damage to the road, thus avoiding interference with traffic caused by the installation of road weather stations.

In road conditions where embedded road sensors are inconvenient or cannot be installed, remote sensing installation means that there is no need to close the road or cut the road surface, and the installation work is both safe and convenient. Low maintenance is an ideal choice for the composition of road meteorological systems.

It can be installed on existing weather stations or on other buildings with unobstructed road views.

Multispectral measurement technology enables accurate detection of the thickness of ice, snow, and standing water on road surfaces.

By providing road condition information, accurate monitoring data can be provided to road management departments to take response measures before road safety hazards occur.

2、 System composition: road condition sensor, collector, pole bracket, power supply system, cloud platform

3、 Product application

1. Remote installation of bridge deck

2. Accident prone areas

3. Areas with high traffic volume

3. Areas with frequent rain and snow

4、 Product Features

1. Remote measurement of road area for water, ice, and snow

2. Measure the road surface condition

3. Measure water accumulation, ice surface, and slippery conditions

4. Non embedded design

5. Corrosion resistance

6. Infrared detection up to 15 meters away

7. No need to close the lane, simple installation and maintenance

8. Sturdy design, all-weather measurement

5、 Technical parameters