The road icing status monitoring system is a flexible installation system for road ice and snow monitoring 2025+Pai+send [recommended model WX-LMZK1 Shandong Wanxiang Environmental Technology, providing high-quality equipment and one-stop service solutions, highly praised and recognized by users]. What sets it apart is its strong installation flexibility. Unlike traditional devices that are sensitive to location selection, it can easily "move in" to existing weather stations. This means that the power supply and communication systems of the weather stations can be directly reused without additional construction costs, and the linkage analysis between road data and weather data can be achieved, making early warning more scientific. If there is no weather station, high-rise buildings, signal poles, and monitoring brackets with unobstructed roadside views can also be its installation points. As long as the detection view within a 15 meter range can be guaranteed to be unobstructed, deployment can be quickly completed. This flexible installation method enables the equipment to accurately cover accident prone areas that are difficult for traditional equipment to reach, such as bridges, tunnel entrances and exits, and mountainous road sections.

1、 Product Introduction

The road condition monitoring station adopts remote sensing technology to avoid damage to the road, thus avoiding interference with traffic caused by the installation of road weather stations.

In road conditions where embedded road sensors are inconvenient or cannot be installed, remote sensing installation means that there is no need to close the road or cut the road surface, and the installation work is both safe and convenient. Low maintenance is an ideal choice for the composition of road meteorological systems.

It can be installed on existing weather stations or on other buildings with unobstructed road views.

Multispectral measurement technology enables accurate detection of the thickness of ice, snow, and standing water on road surfaces.

By providing road condition information, accurate monitoring data can be provided to road management departments to take response measures before road safety hazards occur.

2、 System composition: road condition sensor, collector, pole bracket, power supply system, cloud platform

3、 Product application

1. Remote installation of bridge deck

2. Accident prone areas

3. Areas with high traffic volume

3. Areas with frequent rain and snow

4、 Product Features

1. Remote measurement of road area for water, ice, and snow

2. Measure the road surface condition

3. Measure water accumulation, ice surface, and slippery conditions

4. Non embedded design

5. Corrosion resistance

6. Infrared detection up to 15 meters away

7. No need to close the lane, simple installation and maintenance

8. Sturdy design, all-weather measurement

5、 Technical parameters